Jump to content

Matthew Anthony

Member
  • Posts

    62
  • Joined

  • Last visited

Matthew Anthony's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. FINALLY figured it out. It was some wacked out effect routing. A buss was somehow receiving a feedback loop signal from one of my channels and it kept compounding on itself, getting luder and luoder... however I had the channel muted so didn't see the lights, or hear the feedback loop. This was somehow triggering logic to stop playing audio. I fixed it by removing the signal routing. DONE and THANK YOU to everyone... you helped me to stay on top of it all day!
  2. I removed all AU components from the Plug-Ins and Applications folders. They appeared in Logics Mixer with a diagonal slash. I clicked and selected No Plug-in. Problem persisted. I started deleting tracks until the song played smoothly. I thought I had it, so bounced the project.... Problem persisted. This is what the bounce looks like
  3. Thanks guys, I had only "bypassed" them. Will start going through deleting tracks one by one and come back in a bit with feedback.
  4. Thanks for the help Everything runs fine outside of logic. This problem also happened a couple months ago on another project before I had the Onyx i get the same issue using both Onyx and Internal
  5. I turned off ALL plugins on ALL tracks and the problem persists
  6. Whatever logic is doing to the audio is effecting other programs. I am unable to listen to audio on you tube and I tried playing an mp3 in another program and it didn't work until i applied changes in the logic audio preferences effectively reseting whatever is happening.
  7. Troubleshooting.... I've been trying to play the track using both the Onyx and the Built in output... that screenshot was taken when I was troubleshooting with Built in Audio. It seems like there's something within my tracks themselves triggering this error. If i mute certain tracks, it eliminates the problem, but only some of the time. I'm simply trying to bounce this out, so as I continue to troubleshoot, I will try freezing one by one.
  8. Thanks, I've been troubleshooting on both my Onyx interface and the built in audio. I've also noticed, just now, that the audio is cutting out, even when NOTHING is playing.... I can tell because there's an audible click coming through on the speakers, as if some sort of preference is being changed on its own.
  9. My audio is cutting out in roughly (but not exactly) the same spot on my track each time I play it. The only way to get it back is to "apply changes" in the audio preferences pane (without actually making a change) CPU and HD meters look fine, I haven't changed any audio parameters for years. Hmmmm The only thing I can do to sort of, but not really, diagnose the problem is mute or solo tracks 1 by 1. Even this has proven to be useless as sometimes, logic reacts, to this troubleshooting method and other times not. I'm lost.... I attached a screenshot in hopes it will help you
  10. one of the basic functions in logic is to have it snap your regions to "line" when you're extending or shortening. I say, "line" because i'm not sure what else to call it. snapping to smart, bar, beat, division, ticks, frames or QF doesn't work anymore. what happened? what have i done wrong?
  11. Hi guys I created regions by recording midi and as i cut and slice my project, logic's smart snap, and bar snap are not working properly. its really annoying as i'm being forced to zoom in really far to get line things up and even then ... logic won't snap! soooo annoying! I tried absolute value. seems the only way i can slice at the bar is to extend it past the bar, then slice at the bar..... is there someway to reset the smart snap? anything else i could try? Thanks!
  12. Recent project works fine on my imac but not on my macbook. audio cuts out from time to time usi9ng both my omega lexicon as well as the internal audio driver. it simply cuts here and there.... the CPU looks fine, and even when the audio cuts, the signal on the main channel output is "showing" signal... visually but no audio. this is creating an issue when i work from home vs the macbook, because i'm unable to record into my partners PC/Protools Setup using spdif
  13. Sorry for the late response on this guys, I appreciate the feedback and will make note.
  14. I'm unable to open a recently saved EXS instrument.... I imported an MP3 and converted a section to a new sampler track (EXS24) Where does Logic store the separate samples? I saved the instrument in User/Library/Application support/Logic/Plugin Settings/EXS24/SongFolder/new instrument.pst All assets were saved to project folder. When I try to open the instrument in a new project, it doesn't work. instead of my samples, the EXS24 plays a tone.... Many thanks
×
×
  • Create New...