LaRssA

That seems like it did the trick. Thanks a mill, David, you are indeed a lifesaver! I found another way using Sibelius (yeah, who would have thought good ol' Sibelius would "beat" two DAW's), but doing it directly in Logic is much faster!

Looks like you got the same result as I did... See the attached images in the zip. At bar 263, there's a change to 3/8 time, but that time-change is removed completely once you've done the cut. I can probably fix this manually after the cut (I'm assuming Logic will fix any off-beat error automatically when inserting a new time-change..?), but that's really not how I'd like the function to behave Archive.zip

Here is the project file. What I have done with the project prior to this (aka. how I normally prep.): - Deleted all regions before and after the section I want, and muted regions inside the wanted cue - Deleted ALL automation data - Deleted ALL controller data (only notes remain) - Merged the regions per track - Renamed the region to match the track name - Deleted unused MIDI-tracks + all audiotracks This is what I do before I try to cut in the project and export the MIDI for further editing in Pro Tools (sorry, I work faster with quantizing in PT..). For the purpose of this upload, I have also removed all notes inside the regions. The only thing that remains now is cutting between where the locators are currently at. I tried a third project, and that also works perfectly - although no x/8 time in that project. 02_01070900-test.zip Project file

Sadly, I've tried all three places where the function is available, without it making any difference. Using the latest build of Logic btw...

I'm in the middle of a big movie-project and want to split my full-length project into cues. Since I normally work in Pro Tools, I'm used to the "Cut Time" function there, but I've seen several bugs using it. For this project, Pro Tools removes random MIDI-data when I cut time, and since the files originates in Logic, I figured I might as well try doing it there. After (A TON!!!) of looking around, I finally found the function mentioned in the topic on this forum, kindly explained by David. (thanks!!) However - Logic gives me a different bug. When I use the function, it bugs up my time signature changes. Since this is synced to picture, they are used regular throughout the project. I have a 3/8 change, and it is ignored. I tried it on a different que, and the function seemed to work perfectly there (only one change from 4/4 to 3/4), so I'm quite sure I'm doing it correctly: 1: Select the bars using the locators (for this cue, bar 1-279) 2: Run "Cut section..." .... 3: Logic removes/edits the time signatures, leaving a project useless for prepping for recording. Any tips/ideas is HIGHLY appreciated as I'm kinda on a deadline

Hi! I'm currently using Mainstage 2.1 on a gig with two keyboards. All software is up to date, and my setup is as follows: Macbook pro 2.8ghz 4gb ram (standard config - bought a month ago) Triton Extreme 88 Axiom 61 Terratec Producer Phase 26 (old interface, but it has what I need...) The Triton is connected to the terratec with MIDI, and the axiom and terratec is connected to my mac with USB direclty - no hubs. My problem is: The latency varies over time. It seems like the longer I use it, the longer it gets. If I then go on and change the buffer setting, it "resets", and the latency is normal. (note that I can run 32 samples without any pops or clicks and the CPU level aren't that high.) I've tried wieh the I/O Safety Buffer both on and off, but it doesn't matter. The thing is that every time I struck a key or move a controller, it takes some time before the MS graphics updates, but the graphics and the sound is always in sync. This is why I don't think it's the audio interface. The delay displayed at the bottom of each fader in MS aren't close enough to be the cause of this - although I'm using some limiters with a bit of look-ahead. I should also mention that my pedals are overlapping at times - at least on the graphics. One of them works only on one, but the other one seems to press down both. I use two sustain and one exp. that is connected to my axiom. Could this be it? midi-"feedback". if so - isn't it weird that it come goes? I noticed now that the "midi trough" is set to automatic on the layout - would it make a difference to change these to "do not pass trough"? (I will try later on today at a rehersal...) Hope I've included all the info needed, and PLEASE HELP ME!! It's kinda hard to use MS if there's no solution to this...