udbhav Posted April 23, 2014 Share Posted April 23, 2014 This has been driving me nuts, any help would be most appreciated. Here's the setup: Track A routes to Bus 1, track B has Bus 1 as an input, and track C has an arbitrary in on my interface as it's input. I arm B and C, both show levels being input. While recording, both B and C are drawing the recorded waveforms, but as soon as I hit stop, I'm left with a completely empty region on track B, and a normal one on track C. If I disarm C and record, B records perfectly. Track A can be whatever, audio, software instrument. I've recreated this on both my MOTU 828mk3 and my Macbook's built in soundcard. Anybody else experience similar issues? Here's a set of images to help illustrate the problem: http://imgur.com/a/GPuNt 1st image is the setup, 2nd is a successful recording of the bus audio by itself, 3rd is recording of B and C simultaneously, and 4th is the end failed result. Would be tremendously helpful to just know if people can reproduce this problem, I got 0 response over at discussions.apple.com. Thanks! Quote Link to comment Share on other sites More sharing options...
Eric Cardenas Posted April 24, 2014 Share Posted April 24, 2014 This is an old bug. You are recording into track B but the waveform is invisible in the tracks area. Open the region in the Audio File editor and choose Audio File > Refresh overview(s). There is some additional information about this in this thread: Recording from Bus & Count-in Quote Link to comment Share on other sites More sharing options...
udbhav Posted April 24, 2014 Author Share Posted April 24, 2014 Thank you so much! That teaches me for trusting my eyes and not even listening to see if there was audio. Quote Link to comment Share on other sites More sharing options...
Eric Cardenas Posted April 24, 2014 Share Posted April 24, 2014 You're welcome! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.