Brucebeatz

MacBook Pro 2018 Logic pro 10.5 Each time I create a zone, it is as if it sees the mode as a global mode, and mode change isn’t confirmed. I have attempted setting this up myself but I have had some testing issues. https://support.apple.com/en-gb/guide/logicpro/ctls71c30a1c/mac “The simultaneous use of modal and modeless assignments allows you to do things such as: …” The bullet points are understood but no examples of how to action this? All the other requests for this topic seems to have an issue and when resolved, the fixes aren’ straight forward. The values to change the mode selection, are not changing, when rotating the first configured knob My faders only move by moving the knobs, when the mode value is set to “Scaled” “For messages containing neither Lo7 nor Hi7 placeholders, Logic Pro assumes an incoming value of 1. This is typical for pressed or released buttons. Also see Multiply field in Controller assignments Expert view Value parameters in Logic Pro.” Does this mean that it sees the value as one not allowing me to use this as a mode switch knob? I understand that this is an advanced topic, but this would help a lot if users from saving all assignments in the no zone column. Thanks in advance