I have Logic 9.0.2 on an iMac with a TC Electronics Studio Konnekt 48. For additional analogue inputs I use an Alesis AI-3. I recently recorded a band using the ADAT inputs. Listening back I get sporadic clicks which appears on all tracks which I did not hear on recording. I believe it might be my digital clock setting. On the session I had it set to internal on the SK48. In Logic I record at 24bit 44kHz. The Alesis's spec says it is a 20bit 128 times oversample. I am a bit confused regarding setting the clock e.g. internal, wordclock, ADAT etc and usually just leave it on internal.Most of the time I use the SK48 inputs only and do not get this issue. If using the ADAT only should I set this as the master clock, what happens if I use ADAT + SK48. I did notice, that when trying to work this out that the SK48 does lock to the ADAT which is indicated on the front panel. i.e a solid orange LED when the clock is set to internal. This then lead me to think that as the Alesis is 20bit ... should I set my session to 16bit and not 24bit? Does it matter?
Thanks in advance for any help in this.
Neal