Jump to content

Jimi-Dharma

Member
  • Posts

    57
  • Joined

  • Last visited

Jimi-Dharma's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Thanks. Where is that perimeter? I’ll try changing it.
  2. I've got a 500 Series rack with some goodies, and I'm been routing to and from with the in/out utility for a while now. The mix parameter almost never works right. I hit the ping button, reset the audio device, quit and reopen, etc. Sometimes it works great, but it seems like as I make other adjustments with plugins etc, something will happen that causes a slip in phase, and sometimes a massive delay. I can't figure it out. I'm using an aggregate device for the Cymatic Audio uTrack and the Roland Studio Capture Simultaneously. No other hiccups with this setup. Any ideas on keeping the in/out utility in phase consistently? Thanks in advance!!
  3. So I've managed to make a new project that does this, but it only works on one track at a time, and that track has to be selected. I imaging there may be an environment to build for this? Any help is appreciated! I want to change 2 guitar inputs, a bass guitar input, 3 vocal mics, and possibly a synth. I used to do MainStage with a floor controller to do this, but it was a tap dance that takes away from the show, plus I have a lot of really cool automations, almost all with curves in these songs, and I want to copy and past that into the live session.. This will only work if there are control changes on all the tracks
  4. Thanks for responding. Can you please direct me to a tutorial on how? I've been trying to send program changes through the midi AIC driver with no luck.
  5. You should be able to set any device to not go to sleep. Which device is it you want to have stay awake?
  6. Hello all I'm trying to bring backing tracks and automated FX on guitar and vocal channels to the live stage. I have been through the MainStage route and it's too much of a jumpy tap dance. I want to add program changes to switch Performance patches for each song. I've been searching and searching and trying so many things and can't figure it out. Any help is appreciated! I attached a screenshot of what my session looks like. Thanks in advance!
  7. I should note that it's unique to this project file. I have several other projects that don't have this problem. I suspect some setting was accidentally changed that caused this. Any thoughts anyone? Thanks in advance!
  8. I made a quick video to show the problem. Basically would like slower fader movements to write points with my X-Touch controller. It works fine in 'Write' mode or in any mode with the mouse,, but for some reason, with the x-touch it doesn't want to record slow movements.
  9. Hey folks! Got a new issue, hopefully with a solution! I got a Roli Seaboard Rise 49 recently, and it uses multiple MIDI channels to achieve 'Per-Note' Modulation features, like a bunch of individual monophonic synths. Each note you press(and hold) activates the next MIDI channel so that you can slide/glide/rise/etc for various controls of modulation, plus the Global controls are on a separate channel. This quickly uses up most of the MIDI channels and doesn't leave room for many more controllers. Is there a way to record MIDI from multiple controllers that are on the same channel numbers? I'm dreaming of the day that the track header has not only a 'MIDI channel' selector, but also a MIDI Port/Interface selector. I'm trying to wrap my head around more advanced stuff in the Environment, but I'm still not coming up with a solution. Thanks in advance for any ideas out there!
  10. I'm using an RME Fireface 400 in Logic X and it shows input no problem,,, records no problem, and shows on the meter... Thing is, it won't send to Output, Bus, or anything. It's as if the audio is blocked at the end of the channel strip and can't get out. Software instruments play just fine, and I can record and playback audio no problem, but still can't get the audio to pass through while monitoring. I've tried every buffer and sample rate setting in the RME mixer and settings and in Logic and I'm stumped. Any help is appreciated!!! Turned out to be somehow, software monitoring got clicked off. Brain Fart or Mouse mis-fire... I don't know how it happened. Sorry guys!
  11. It's my headphones! Sorry guys, I should have figured that out in the beginning. Thanks for all the help!
  12. I guess I've been trying everything to fix the issue and hadn't taken those off yet. I'll take em back off and mess with it some more.
  13. Thanks and sorry I took so long! Here it is,,, I double checked and it's still a slight bit bleeding into the other side on both.
×
×
  • Create New...