Jump to content

matthiasmax

Member
  • Posts

    14
  • Joined

  • Last visited

matthiasmax's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Alright, I found quite a nice workaround. I've created an alias to my "Bus" presets folder (this is where most of my channel presets lie that I want to browse though). Copied the alias to "Track" and "Instrument" folder and I now can browse through the presets. Thanks for the input anyway!
  2. Hi David, in case I would want to short cut next/previous on a FIX bus, say 64, would that be possible?
  3. Hi, I have set my commands and it works for the LEFT track/bus/instrument. I want it to browse throught the RIGHT channel on the screenshot. I'm talking about THE logic 2 fader thing besides the arrangement. Has anyone done this? Thanks
  4. HI, still on 9. Is something like this available in X?
  5. triplets, I changed the topic to make clear that the preset is "bad". The samples in this preset are cut very lousy. M.
  6. Alright, did some testing and found out that the preset's samples are cut quite bad ! Check this example for A#2:
  7. Ok, I have tried this in a new project with JUST the piano and still the problem exists! Project file attached. Can anyone open the file and try it on their system? Or save the Ymaha Grand preset to a file and send it to me? Thanks! Archiv.zip
  8. I have closed logic, restarted Macbook. I have re-played the midi line and quantized it. No solution!! I have now BIPed it to see the time shift. Then I bounced again with a EVB3 and the problem is gone ! It goes as far as that with other EXS presets it's also gone. Means my Yamaha Grand preset is "damaged"? See the 2 bounced versions, the Yamaha is delayed:
  9. Hi guys, I haven't had this ever in Logic. The timing of an EXS track (YAMAHA Grand) is horrible. It seems to always "fail" at the same position within the midi part. The notes get later and later (off the beat) the more the end of the part is reached. Just as if you play an audio loop with 98 in a 99 project. The first half of the part is fine. Other stuff in the project plays well. Any ideas!? Thanks!
  10. Hi, anybody know how to set the vertical scale to dB instead of percentage or samples? Thanks!
  11. Hi Micha3l! thanks so much for converting these files ! CHeers
  12. Anybody up for uploading the Killers or Lilly projects!!? I'll donate a beer or whatever! Thanks
×
×
  • Create New...