Jump to content

Beanz

Member
  • Posts

    40
  • Joined

  • Last visited

Beanz's Achievements

Apprentice

Apprentice (3/14)

  • First Post Rare
  • Collaborator Rare
  • Conversation Starter Rare
  • Week One Done
  • One Month Later Rare

Recent Badges

1

Reputation

  1. If that’s the case I feel sick lol been doing this longer than most so why is there no guidance in using this stuff ?anyhow have returned the UMC1820 as thought it faulty, Behingers loss for being totally crap at any form of support with no user book, shocking, as said why sell something with no info on how to use it, are we just ment to take a lucky guess 😂
  2. Eeeek windows lol but all is set as should be in mac audio / midi enviro configuration, I do have many other interfaces, focusrite, avid protools, m-audio and many many others etc etc as am very old and been doing this for 45 years lol 😂 almost my bed time
  3. So are you saying if I turn this knob to the right then the “stereo outputs” as it’s called ie 1 & 2 from Logic will then be routed and sent to the actual Jack outputs 1 and 2 of the Umc1820 and thus on to my analog mixer? Thank u all btw xx
  4. Hmmm doesn't explain why there was no actual output from the 1 & 2 line outputs, but as said if I plugged in headphones and pushed the "Monitor 1 & 2" I got signal, also Logic showing in the channel strip that signal was there, just not coming out of the rear jacks 1 and 2 or main out as it's called
  5. OK Olavsu1 many thanks, no way to check as I returned it today under a faulty unit, will wait for a replacement unit. Makes me sick that Behinger don't have the decency to issue a user operational manual so what do we do just fekin try & guess how to use it ???? Totally crap ;(
  6. OK I see it 🙂 what does this do, sorry to ask but there absolutely no user manueal for this interface just a quick start guide ?
  7. Olavsu1 it's not a sound card it's a USB Audio Interface & there is no "MIX" button but thanks anyhow 🙂
  8. lol yes that's true, so tried with the ADA8200 disconnected it and alas still 1 & 2 no good, but also exploring a tad more and 11 & 12 on the ADA8200 also same, i.e no physical output I see at the back of the ADA8200 it says SPDIF output 11 & 12 what's the fekin point of that ? So even more confused now 😞
  9. Was wondering that will check tomorrow, if the do then what ? 🙂
  10. CHEERS very much for the note The UMC1820 is the Audio interface with the ADA8200 as an extension via ADAT, ADA200 set as slave (ADA8200 being an expander & not an interface itself) The UM1820 is seen and chosen in Logic Preferences & as in the snaps it can then see all the available line outputs from the across the 2 units (the ADA200 being set as slave) so 20 line outputs but only thing not working is the physical output of 1 and 2, if I plug in the Headphone output on the UMC1820 and select monitor output 1 & 2 I can hear what is being sent?? Just nothing from the back outputs Hmmmm faulty unit maybe ?
  11. Yeah done all those and output is there on both thrac and main output but no sound from actual outs ?
  12. Hi all This maybe a Behringer thing, just mucking about with a UMC1820 & a ADA8200 Expander, all is well only the STERIO output from Logic i.e 1&2 won't play? There is signal on the Logic faders but nothing actuly coming out of the ports? any ideas, see my snap? Ta
  13. Hi there any help most welcomed So purchased this Behringer ADA8200 to add some inputs to my Focusrite Clarett 2 Pre Connected the ADAT output of the ADA8200 to the ADAT input on the Clarett 2 Pre with the optical cable Set the sample rate on Focusrite to 44.1 to match the ADA8200, sample rate same in Logic also, set the ADA8200 to slave 44.1 Set the Focusrite to 44.1 and ADAT as clock course, all locked up OK & sync green light Opened logic & saw I had a bunch of new inputs, for some reason mono 1 to 14 also stereo 1 - 14 ? Whatever I try I cannot get a signal into Logic, the signal is reaching the ADA8200 as the led flashed, but nothing gets into Logic ?????
  14. An old favourite of mine through the decades to trigger a noise gate Sadly since the last update this function no longer works, when I set up a trigger and align the side chain nothing happens, no trigger
×
×
  • Create New...