Okay. So I have a scarlett 2i4 audio interface, my fcb1010 connected to it. Wabbitwanch's ifcb.
After countless YouTube videos watched, countless Google searches, I still cant get this to work. Ifcb is definitely picking up my behringer(green light at the bottom left). What I'm trying to do is use worship guitar essentials that I purchased from a fellow named Abel Mendoza. Its a full guitar rig with stomp boxes and such. I want to be able to press a botton on my Behringer and see distortion come on, then press it again and have it come off. I was successful at mapping the first switch on my behringer and it was turning the stompbox on and off like I wanted it to. However, I proceeded to map the next switch(2) of my behringer to the next stomp box, went to edit mode to see if it worked. And all that's happening is that when I press switch 1, its turning both stomp boxes on, when I press switch 2, its also turning both stomp boxes on. I want each switch to control a different stomp box independently, NOT one switch controlling all. What I do notice is that when I assign the switches, on all of them the channel area comes up as "channel 1-16." Type is always coming up as "single value" im guessing mainstage reading all of them as channel 1-16 is the problem? Unless it's something else I'm missing here.