Logic Pro X, which was working fantastic for me -suddenly (randomly as far as I can tell) became completely dead and unusable for recording.
Apparently many have had this issue; I have tried several "fixes" which worked for others but not me.
THE PROBLEM: Was recording successfully in a project with low latency (10.6 milliseconds according to Pref/Audio. *Suddenly* a MASSIVE latency developed for no apparent reason. It is about 500 milliseconds long!!! (half a second). Recording is suddenly impossible.
>NO changes were made to my computer.
>All plug ins are disconnected -just an audio track.
>Pref/Audio "says" the latency is about 10 ms -but it is actually a full half-second. I
I had this problem several times before; it always occurred suddenly when Logic was on for say an hour or so. This fix use to work, but for some reason doesn't now.
(1) Reboot computer and restart Logic Pro X.
I tried the following suggested fixes I found online which have worked for others -but not for me.
(2) Restarted core audio (doesn't work)
(3) Changed buffer (was 128, tried 64, 32 -doesn't work (currently sitting at 128).
(3) Checked recording delay setting -apparently this has sometimes randomly reset for folks -but it was set to 0 as it should be.
(4) Created an aggregate device per online suggestion -no change.
A clue???
(5) Tried different audio devices -and reading have found others experienced this strange issue with a wide range of audio devices. HOWEVER I did change the input device to MAC's microphone, and it seemed not to have latency then.
Any suggestions?
Thanks in advance!