63strat Posted October 25, 2013 Share Posted October 25, 2013 Hey all, I've been looking everywhere in the manual, but can't find out how to change bar 5 to display as bar 1. In other words, I want the music at bar 5 to be renumbered to display bar 1. Any help appreciated. Quote Link to comment Share on other sites More sharing options...
triplets Posted October 25, 2013 Share Posted October 25, 2013 I don't think you can do that. Use markers instead. Quote Link to comment Share on other sites More sharing options...
Beer Moth Posted October 25, 2013 Share Posted October 25, 2013 Don't know about LX,but you can set the offset for bar numbers in the Score Project settings under Numbers and Names in 9. Bar ruler don't change though. HTH. Quote Link to comment Share on other sites More sharing options...
camillo jr Posted October 25, 2013 Share Posted October 25, 2013 Why do you need bar one to move? If it's for the purposes of having "SMPTE zero" count from your selected bar, you can do this from Settings. (Note that this will still leave the bars unchanged in the ruler.) For instance, say you want your time count to start at bar 8. 1) Copy the bar position from the transport 2) Open Settings / Synchronization 3) Paste your bar position into the lower left field (Bar Position) and also check the "Enable separate SMPTE view offset" box 4) Right-click in the transport's field and select "Use SMPTE View Offset". Again, I don't know why you need to move bar one but this procedure at least will give you the ability to know exactly how far along the song is in minutes and seconds without having to subtract your empty bars at the top of the song. And as mentioned, Markers are your friend here for locating to the start of your song. Quote Link to comment Share on other sites More sharing options...
63strat Posted October 25, 2013 Author Share Posted October 25, 2013 Thanks everyone. The reason is for the players to see each cue starting at bar one., and have this match what I'm seeing in the Arrange window. Nothing to do with SMPTE zero. I know I can do this in the Score editor, but was hoping I could make the change in the Arrange window. Quote Link to comment Share on other sites More sharing options...
Metatool Posted November 20, 2013 Share Posted November 20, 2013 is there a way to change meter and subdivision in the ruler in logic 9? Quote Link to comment Share on other sites More sharing options...
codydboyce Posted November 20, 2013 Share Posted November 20, 2013 is there a way to change meter and subdivision in the ruler in logic 9? Even if you do this, the bar numbers will remain the same, in sequential order. I don't know of any way to do this, sorry! Quote Link to comment Share on other sites More sharing options...
camillo jr Posted November 20, 2013 Share Posted November 20, 2013 is there a way to change meter and subdivision in the ruler in logic 9? Meter, no, subdivision yes, from the transport. Quote Link to comment Share on other sites More sharing options...
codydboyce Posted November 20, 2013 Share Posted November 20, 2013 is there a way to change meter and subdivision in the ruler in logic 9? Meter, no, subdivision yes, from the transport. You can change the meter from the 'List' menu, or under the "signature" tab of the global parameters above the arrange window. Quote Link to comment Share on other sites More sharing options...
tootone Posted March 6, 2019 Share Posted March 6, 2019 +1 for bar view offset in the transport - not just in the score. One of the things I use Logic a lot for is score and parts notation for rehearsal. The MIDI regions for notation are usually alongside audio tracks or even a movie track. 99.9% of the time there is song / audio / video content before the start of bar 1. (Count off for audio recordings, lead-in on video, or even pickup notes in the actual song which for notation purposes usually come before bar 1 as well) So bar1 in the music is almost never aligned with bar 1 in Logic. Yes, I know I can use a measure number offset in the score numbers preferences, but it would be REALLY nice to turn on an offset in the bar location display in the transport just as you can for SMPTE location display. That way when we we're rehearsing and someone says "What are the exact notes/chord at 78 in the sheet music?" I could actually see those notes by going to 78 in logic. And yes, I know I can always just add 2 or 3 or 4 to the number, but it would be nicer to have bar numbers aligned everywhere. And many of us know by sad experience, that you NEVER want to move the beginning of your Logic project before bar 1 - so that's a non starter. I've tried it. Quote Link to comment Share on other sites More sharing options...
Music Spirit Posted June 16, 2020 Share Posted June 16, 2020 +1 for bar view offset in the transport - not just in the score. One of the things I use Logic a lot for is score and parts notation for rehearsal. The MIDI regions for notation are usually alongside audio tracks or even a movie track. 99.9% of the time there is song / audio / video content before the start of bar 1. (Count off for audio recordings, lead-in on video, or even pickup notes in the actual song which for notation purposes usually come before bar 1 as well) So bar1 in the music is almost never aligned with bar 1 in Logic. Yes, I know I can use a measure number offset in the score numbers preferences, but it would be REALLY nice to turn on an offset in the bar location display in the transport just as you can for SMPTE location display. That way when we we're rehearsing and someone says "What are the exact notes/chord at 78 in the sheet music?" I could actually see those notes by going to 78 in logic. And yes, I know I can always just add 2 or 3 or 4 to the number, but it would be nicer to have bar numbers aligned everywhere. And many of us know by sad experience, that you NEVER want to move the beginning of your Logic project before bar 1 - so that's a non starter. I've tried it. I would really like to be able to OFFSET the bar numbers in the main arrange window so that they conform with the Score ( ie not just use the Score Editor internal settings offset) - I want to be able to define BAR 1 on the Arrange page and for that always to correspond to the Score. Just wondering if there is any change of functionality I have missed or forgotten in recent Logic X versions? PS Just looked at the features of LPX 10.5 in which one of the points is this: The time positions in the LCD display and floating time display windows now reflect an enabled SMPTE View Offset. I have tried to change the Bar Number via this SMPTE offset dropdown menu but on my 10.4.4 it is greyed out - was this a bug now fixed in 10.5? Quote Link to comment Share on other sites More sharing options...
studioj Posted December 9, 2020 Share Posted December 9, 2020 This feels like an odd omission in Logic... would love to see ability to renumber bars in the arrange in a future update. I've been seeing an odd bug lately also, where if I change the song start marker and it is left on an uneven beat / subdivision, then the bar/beat/subdivions demarcation lines in the piano roll are all messed up for all midi regions down the line, making editing difficult. I can't seem to reproduce it 100% however. Quote Link to comment Share on other sites More sharing options...
David Nahmani Posted December 9, 2020 Share Posted December 9, 2020 Honestly there are so many bugs involved with changing the project start marker that I recommend you forget that feature even exists, and never ever move the project start marker. Quote Link to comment Share on other sites More sharing options...
studioj Posted December 9, 2020 Share Posted December 9, 2020 That sounds like good advice! Quote Link to comment Share on other sites More sharing options...
Music Spirit Posted December 16, 2020 Share Posted December 16, 2020 +1 for bar view offset in the transport - not just in the score. One of the things I use Logic a lot for is score and parts notation for rehearsal. The MIDI regions for notation are usually alongside audio tracks or even a movie track. 99.9% of the time there is song / audio / video content before the start of bar 1. (Count off for audio recordings, lead-in on video, or even pickup notes in the actual song which for notation purposes usually come before bar 1 as well) So bar1 in the music is almost never aligned with bar 1 in Logic. Yes, I know I can use a measure number offset in the score numbers preferences, but it would be REALLY nice to turn on an offset in the bar location display in the transport just as you can for SMPTE location display. That way when we we're rehearsing and someone says "What are the exact notes/chord at 78 in the sheet music?" I could actually see those notes by going to 78 in logic. And yes, I know I can always just add 2 or 3 or 4 to the number, but it would be nicer to have bar numbers aligned everywhere. And many of us know by sad experience, that you NEVER want to move the beginning of your Logic project before bar 1 - so that's a non starter. I've tried it. Totally agree - still a puzzle why Logic programmers have not after all these years addressed this as it is very relevant for anyone who has their computer in the studio for a session and is keeping an eye on the Audio and the Score they have created and made into parts for musicians to play. Personally I have two ways of dealing with this: 1/ prioritise the Part Bar numbers being same as the Transport/ Arrange Display and let go of having Bar 1 be the first bar in the Score/Parts. So you can quickly get to the same bar that a musician in the session needs to reference or has a question about. ( Usually this is when I have beat mapped an audio track for an arrangement. 2/ Use the Numbers /Names Bar offset if you are producing a part where the Arrangement doesnt need to play alongside audio. But is it's own discrete arrangement. Quote Link to comment Share on other sites More sharing options...
mdoolin Posted May 19, 2021 Share Posted May 19, 2021 I found a video showing a simple way to do this - 1 Quote Link to comment Share on other sites More sharing options...
DanRad Posted May 19, 2021 Share Posted May 19, 2021 This comes up every now and then and David and many others warn of the severe consequences of using negative numbers. But the need for preroll, or (God forbid!) a pick up while still saying in sync with the written parts and the sequencer require negative bar numbers. I have been using negative bar numbers for over 20 years with Logic, and the sun still comes up in the morning. Yes, now and then a few little weird things pop up, but come on, they are there, I use them, and if you find them important, I say, LIVE DANGEROUSLY! Quote Link to comment Share on other sites More sharing options...
broza2broza Posted May 25, 2021 Share Posted May 25, 2021 haha. Us long long time users of Logic have been burned badly by using negative bars for countoffs and so about 15 years ago I swore I would never again ever use a negative bar for count off. I think things have gotten better since then. However film composers are driven a bit crazy by this. PT can float their bars around but in Logic bar 1 is bar 1 is always bar 1! I always just start film cues on at least M3 and often later if need be. Musicians don't mind too much having their first bar be M3 or so... Quote Link to comment Share on other sites More sharing options...
mdoolin Posted May 25, 2021 Share Posted May 25, 2021 What is the bad thing that happens when you use negative bar numbers? Quote Link to comment Share on other sites More sharing options...
triplets Posted May 25, 2021 Share Posted May 25, 2021 What is the bad thing that happens when you use negative bar numbers? Logic starts behaving unpredictably. Can lead to project corruption the more far off you go with negative numbers. YMMV. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.