dougb256 Posted February 15, 2018 Share Posted February 15, 2018 I sure hope that the experts can help me, this one has me thoroughly confused. I was messing with a project in LPX 10.4, and I noticed that my Arturia 32 note controller (which is plugged directly into my iMac) was not working. If I used the onscreen keyboard I got output, but nothing when I pressed the keys on the Arturia. I opened up MIDI Monitor and noticed that none of my USB controllers were listed. I next checked Audio/MIDI Setup, and while my USB controllers were there, they were all grayed out. I hit the Rescan button, no change. So I made a new configuration named "Test", all my USB keyboards showed up, nothing was grayed out! I re-opened MIDI Monitor and they were all listed there as well. However, nothing registered in MIDI Monitor when I pressed the keys on any of my controllers. I went back to Audio/MIDI Setup and clicked back on my default configuration. No change. I clicked on my test configuration and all of my USB controllers were grayed out again. I hit Rescan, no change. Created a Test2 config and everything was there. But if I go back to any prior configuration, it messes up the newest configuration. And of course there is no output when I try to use any of these controllers. So I created Test3 and that's where it sits right now. Everything shows up, nothing is grayed out... and nothing works. Any thoughts / ideas / suggestions? Quote Link to comment Share on other sites More sharing options...
j.o.ceo Posted February 15, 2018 Share Posted February 15, 2018 +1 Having the same issue in Sierra. Quote Link to comment Share on other sites More sharing options...
dougb256 Posted February 15, 2018 Author Share Posted February 15, 2018 Thing is, I know that at least one of the controllers was working the other day, because I was trying out the Mellotron in 10.4. So it worked, then it didn’t. I did change to a new hub, but I have one of my controllers plugged directly into my iMac, so a hub shouldn’t affect that one. None of them work. The only other thing that I can think of is that I reset the NVRAM, but how that would affect MIDI baffles me. Quote Link to comment Share on other sites More sharing options...
j.o.ceo Posted February 15, 2018 Share Posted February 15, 2018 I usually have to restart Logic to get midi back. It works for awhile and without any warning it just quits. I've been in Sierra for well over a month, this behavior just started about a week and a half ago. The only thing that has changed is I installed the new version of Logic. Quote Link to comment Share on other sites More sharing options...
dougb256 Posted February 15, 2018 Author Share Posted February 15, 2018 Now that I think of it, that controller was working yesterday. I wanted to see what channel my Arturia controller was transmitting on, so I booted up MIDI Monitor. It showed that the Arturia was transmitting on channel 5. But not today. Quote Link to comment Share on other sites More sharing options...
dougb256 Posted February 15, 2018 Author Share Posted February 15, 2018 The only other thing that I can think of is that my iMac got its power unplugged accidentally, but nothing was running at the time. Quote Link to comment Share on other sites More sharing options...
dougb256 Posted February 17, 2018 Author Share Posted February 17, 2018 Uh oh, did I win at “Stump The Experts”? Quote Link to comment Share on other sites More sharing options...
fisherking Posted February 17, 2018 Share Posted February 17, 2018 you could try resetting nvram, and/or the power manager (google for your specific mac). try different usb inputs on the imac. or... someone smarter than me (that's at least 2 people on this forum alone) might have an idea.... Quote Link to comment Share on other sites More sharing options...
dougb256 Posted February 18, 2018 Author Share Posted February 18, 2018 I haven't been able to do anything in the studio for the past 4 days. I had ordered a new MIDI cable to use between my Arturia controller and a new Behringer Model D. I turned off the Arturia and plugged in the new cable, turned it on and tested the Model D. Success! Then I noticed that MIDI Monitor was now showing output from the Arturia. I fired up LPX and it all works just fine. I have zero idea as to why it now works... but it works! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.