jetultra Posted February 18, 2018 Share Posted February 18, 2018 I had just started using Logic Pro recently. Yesterday I connected my AT2035 to my computer and used a Zoom H4n as an audio interface. After a few tweaks and settings changes, I managed to get my mic through to the program. After a few minutes, however, Logic Pro stopped receiving audio input from the mic. It was still connected to the H4n, the H4n was still receiving signal from the 2035, but there were no green bars on the audio track. I unplugged everything and replugged everything multiple times; either it would recognize the H4n and not receive audio, or it would receive audio for 3 seconds and then freeze (the audio levels would stay stationary). The built-in mic works fine, and so does the H4n and my brand new 2035. The H4n is set to the right input number (1) and this all really started after I imported another audio track. Quote Link to comment Share on other sites More sharing options...
David Nahmani Posted February 18, 2018 Share Posted February 18, 2018 Sounds like an issue with the H4n's driver. I would contact Zoom, and ask if they have a driver for your version of Mac OS X. Quote Link to comment Share on other sites More sharing options...
JakobP Posted February 18, 2018 Share Posted February 18, 2018 If you have "Input Monitoring only for focused track, and record enabled tracks" checked in Logics audio preferences, uncheck it and see if that helps. If that doesn't help I suspect there's a problem with your Zoom driver(s)... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.