okulo Posted May 17, 2021 Share Posted May 17, 2021 This is my first post so if I am in the wrong section, may I be forgiven. I've been using Logic for a few years, mainly recording guitar and loops but used to input MIDI via a very basic M-Audio Keystation 49e but due to limited space and a desire to explore MIDI a little, I sold it and bought an Akai MPK225, mainly because it had transport controls and pretty good all round reviews which mentioned that the Logic preset meant that it should work pretty much out of the box. As far as the keyboard is concerned, I have no problems but nothing else seems to work as expected - maybe I was expecting too much from a preset named 'Logic'. The transport controls don't work with the Logic preset but if I reset the Global settings, they do. Unfortunately, every time the power is cycled, the transport controls don't work again and I have to reset the Global settings again. I searched online for clues and just got more confused as there were a couple of guides on setting up Akai MPK2s with Logic dated last year but the version of Logic was different and they were impossible to follow as the Logic settings windows were completely different to mine (10.6.1). The first one (linked below) appears to be an official Akai guide but there are some images which won't load but the second looks to be the same but with all the images: https://inmusicbrands.force.com/akaipro/s/article/Akai-MPK2-Setup-in-Logic-Pro-X https://www.noterepeat.com/products/akai-professional/mpk-2-series/403-akai-mpk2-setup-in-logic-pro-x Logic seems to be willing to get along - it recognises the MPK225 everywhere but they don't want to talk to each other. As I said, I'm pretty new to MIDI and I don't know if I should be looking for solutions on the controller or in Logic or both but I'm well out of my depth. Can anybody offer me some advice or point me to a Logic MIDI primer, please? Quote Link to comment Share on other sites More sharing options...
David Nahmani Posted May 18, 2021 Share Posted May 18, 2021 To assign your transport commands: 1. Choose Logic Pro > Key Commands > Edit. 2. Select a command, for example "Play". 3. Click the "Learn New Assignent" button at the bottom right. 4. Press the Play button on the AKAI. To assign rotary knobs to the Smart Controls pane, you can use this tutorial: https://www.logicprohelp.com/assign-midi-controller-knobs-plugin-logic-pro/ Quote Link to comment Share on other sites More sharing options...
okulo Posted May 18, 2021 Author Share Posted May 18, 2021 Thanks for the reply. I managed to follow a guide I found somewhere and modified the first preset (01 AbleLive) to work but when I try to follow the same instructions and apply the same settings to the Logic preset (13 Logic) the transport controls don't work. So, I'm just using the 01 AbleLive preset renamed to 01 Logic but the annoying thing is that whenever it is switched on the MPK225 defaults to 13 Logic. I'm pretty sure that when I first connected it to my Mac without changing anything, the onboard arpeggiator and Pad repeat buttons worked but whenever they are selected now, in any preset, there is no output whatsoever. The weird thing is, I can see that Logic is receiving MIDI signals in the Control Bar Display when I hit the pads. Quote Link to comment Share on other sites More sharing options...
Jason42 Posted April 15, 2023 Share Posted April 15, 2023 I have the Nahmani book and am just getting through the 6th lesson wherein this is addressed. However, the MPK 225 is being a brat. It's touch pads were super sensitive when I was using them to trigger loops in the first part of the lesson and I had to edit the assignments manually. The pads then only worked while I was holding them and would most of the time turn off when I released. Sometimes the loop would start and I couldn't stop it without resorting to the computer keyboard. The built in arpeggiator is also not working despite following Akai's instructions. 1 Quote Link to comment Share on other sites More sharing options...
David Nahmani Posted April 16, 2023 Share Posted April 16, 2023 20 hours ago, Jason42 said: I have the Nahmani book and am just getting through the 6th lesson wherein this is addressed. However, the MPK 225 is being a brat. It's touch pads were super sensitive when I was using them to trigger loops in the first part of the lesson and I had to edit the assignments manually. The pads then only worked while I was holding them and would most of the time turn off when I released. Sometimes the loop would start and I couldn't stop it without resorting to the computer keyboard. The built in arpeggiator is also not working despite following Akai's instructions. If you need help with the pads don't hesitate to post your assignments so that we can have a look and help you troubleshoot. For the arpeggiator, feel free to start a new topic and there again we'll help you troubleshoot why it's not working for you. Quote Link to comment Share on other sites More sharing options...
Jason42 Posted April 17, 2023 Share Posted April 17, 2023 Thanks for the reply. I kept plugging through and found that the iPad app and keyboard are better for my work flow than the mpk 225. It has something to do with its presets menu and logic not getting along. I may end up getting a larger keyboard with less knobs and functions since I don’t plan to map much. I’m up to chapter 9 and also like automating better than messing with knobs like a DJ. 1 Quote Link to comment Share on other sites More sharing options...
David Nahmani Posted April 17, 2023 Share Posted April 17, 2023 5 hours ago, Jason42 said: I’m up to chapter 9 and also like automating better than messing with knobs like a DJ. Great! Good to hear. 🙂 Quote Link to comment Share on other sites More sharing options...
Clunymac717 Posted April 28, 2023 Share Posted April 28, 2023 I just bought the mpk 225 and im having similar issues with Logic. When I first connected it, I managed to get the arp going after clicking a few buttons, but now I can’t figure out how to turn it on again. Any help? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.