Dynamic_Notes Posted May 28, 2021 Share Posted May 28, 2021 I know everyone's preference will probably differ according to how you've set things up but I'm interested. What are your reasons for doing what you do? Just me - I tend to close Logic if I'm not going to be working for a while and sometimes the computer if I know I wont be using it for some hours. I always close down at the days end. Quote Link to comment Share on other sites More sharing options...
Zipfunk Posted May 28, 2021 Share Posted May 28, 2021 I usually have my Mac on and logic up and running a template in case I get an idea. Same idea as leaving your guitar on a stand as opposed to a case Just my opinion. Drew Quote Link to comment Share on other sites More sharing options...
facej Posted May 28, 2021 Share Posted May 28, 2021 I don't turn off my iMac. I have been known to leave Logic up for days, but find that my USB devices get wonky sometimes - so I have to quit Logic and power cycle my X-Touch - I have started powering down the X-Touch since I am working on my laptop a fair bit, not in the studio. My quick-record template is what is sitting there - an armed audio track, an armed software instrument, and an armed external MIDI track. Quote Link to comment Share on other sites More sharing options...
triplets Posted May 28, 2021 Share Posted May 28, 2021 I don't leave a project open if I'm not working on it. When I'm done, I quit Logic and turn off the Apollo interface because it doesn't support sleep, then sleep the Mac Pro. Quote Link to comment Share on other sites More sharing options...
enossified Posted May 28, 2021 Share Posted May 28, 2021 I always close Logic unless taking a short break (under a half hour). If I know I won't be coming back for a while, I also power down my interface and controller. My iMac is 10 years old, with the factory HDD it took over 3 minutes to boot and open Logic. So I set the Energy Saver scheduler to power up every morning at 7AM and shut down at 10PM. That way it would always be ready to go, but it meant that on days where I did nothing on the machine I was wasting electricity. Last year, I switched to booting off an external SSD which reduced boot time to 30 seconds and Logic opened in 15 seconds or less (I have small projects) so now I power the machine up and down as needed. Quote Link to comment Share on other sites More sharing options...
fisherking Posted May 28, 2021 Share Posted May 28, 2021 i used to experience buggy behavior if i left a logic project open and slept my mac; this no longer seems to happen. but, out of habit, i generally save my work, & quit logic, before sleeping my mac. and if i don't, all seems well anyway. i also reboot periodically, just to 'flush' the ram, and get a clean start. i think, barring any issues, one's workflow should be... whatever works for you, and there's no 'one size fits all'. Quote Link to comment Share on other sites More sharing options...
Dynamic_Notes Posted May 28, 2021 Author Share Posted May 28, 2021 Hi all, Thanks guys for your interesting comments! As I said, everyones situations are likely different, which why it's interesting and theres always stuff to learn from others' experiences. Ive seen lots of comments about reloading logic as a potential fix for many issues. I guess I assumed people just naturally closed it, well at least at days end. What are your thoughts on leaving a project idle but with the CPU bouncing around as shown in the performance meter? Depending on what project I have up, with the transport stopped the processor can be still be quite active. If I just close the project but not Logic, Logic can still show that same activity going on (the [floating] performance meter still shows even if you close a project). If I load an empty project that takes all the activity to zero. If Im away for an hour or so I'll sometimes do that. Unlike in the days of my G4, things load here exceptionally quick, but then at this point I only run stock Logic stuff with no 3rd party installs except Focusrite driver. Since I live in an area (rural) where power can be very dodgy (nasty brownouts etc) I use an UPS reliant on manual shutdown. It makes sense to power down at night and when I go out. Quote Link to comment Share on other sites More sharing options...
facej Posted May 29, 2021 Share Posted May 29, 2021 NB I don't turn off or sleep my computers. Haven't done it since 1981. Don't plan to now. Well, I do close the lid on my laptop Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.