Dinero Posted June 24, 2021 Share Posted June 24, 2021 Hey folks, bit confused at the moment. I'm trying to record the output of one instrument track into a separate audio track. When I set the output of the instrument track to a bus, and then set the same bus as the audio track's input, the audio track doesn't seem to receive any signal. I made a new session just to demonstrate, just with a piano instrument track and a destination audio track for recording. Really mystified as I've done this more than once in the past and it was pretty straightforward. Just wondering if there's some setting switched on somewhere or if I've run into another bug. Or maybe just something really obvious I've missed :/ Any help would be much appreciated! AJ Quote Link to comment Share on other sites More sharing options...
David Nahmani Posted June 24, 2021 Share Posted June 24, 2021 Hello Dinero, and welcome to Logic Pro Help! Can you R-enable the track and press Record so that we can see activity on your meters? Also for screenshots, see this: How to attach files to your post Quote Link to comment Share on other sites More sharing options...
Dinero Posted June 24, 2021 Author Share Posted June 24, 2021 Apologies, only thought to do that after I'd sent it! The signal seems to send to the Aux channel fine and from there, straight to the Stereo out. It's just the input into the audio track that seems to be off. Thanks! Quote Link to comment Share on other sites More sharing options...
David Nahmani Posted June 24, 2021 Share Posted June 24, 2021 Apologies, only thought to do that after I'd sent it! The signal seems to send to the Aux channel fine and from there, straight to the Stereo out. It's just the input into the audio track that seems to be off. Did you actually press the Record button and see an audio file being recorded on the audio track? It looks like on your screenshot you were just in playback? Quote Link to comment Share on other sites More sharing options...
Dinero Posted June 24, 2021 Author Share Posted June 24, 2021 Ah, fixed it! Just me missing a step between arming the track and hitting record :/ knew it had to be something obvious. Thanks for the help! Quote Link to comment Share on other sites More sharing options...
David Nahmani Posted June 24, 2021 Share Posted June 24, 2021 Great! And if you want to monitor your track during playback then choose Logic Pro > Preferences > Audio, click the "General" tab, and make sure that "Input monitoring only for the focused track (...)" is not selected. Quote Link to comment Share on other sites More sharing options...
JakobP Posted June 24, 2021 Share Posted June 24, 2021 Great! And if you want to monitor your track during playback then choose Logic Pro > Preferences > Audio, click the "General" tab, and make sure that "Input monitoring only for the focused track (...)" is not selected. Also go main menu "Record" and uncheck "Auto Input Monitoring" Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.