Jump to content

Automation goes back to zero a little over half way through? [FIXED in 10.7.1]


PJ Palone

Recommended Posts

Hey guys I am new here and new to logic.

 

I am having some trouble with automation on my track

I am on classic acid pattern track you will see that I am selected on the filter cutoff for rift with a gradual zero to 100%. but for some reason the filter goes back to zero a little over half way through the automation. And then jumps back in full blast when it gets to 100

 

You will see the play head is at a point in the automation where it should be at like 60% but has dropped to 0%

 

Any Thoughts?

image1.png.2f6912e54f13e0e610ad6ed3be707f05.png

 

And it’s doing this with any effect I put on there. Even the stock effects

Every track is doing this with the automation. On everything vst or not.

image2.thumb.png.6c1affe1149b143503373e225013a0f4.png

Link to comment
Share on other sites

That's weird. What you could do is press Control-Command-E to open the Automation Event List. Then in the Automation Event List, click the "Additional Info" button to double check all the in-between values of your ramp, and see if they really increase incrementally as expected?

 

1603395790_ScreenShot2021-10-22at13_56_02.png.81bbf6e22eb5aac9b5f8b64978297a9c.png

 

OOoooh I see you're sorted for now. Ok, good to hear. :)

Link to comment
Share on other sites

  • 3 weeks later...
Hey guys I am new here and new to logic.

 

I am having some trouble with automation on my track

I am on classic acid pattern track you will see that I am selected on the filter cutoff for rift with a gradual zero to 100%. but for some reason the filter goes back to zero a little over half way through the automation. And then jumps back in full blast when it gets to 100

 

You will see the play head is at a point in the automation where it should be at like 60% but has dropped to 0%

 

Any Thoughts?

image1.png

 

And it’s doing this with any effect I put on there. Even the stock effects

Every track is doing this with the automation. On everything vst or not.

image2.png

 

This bug was fixed in Logic Pro 10.7.1:

 

Volume no longer prematurely drops to -∞ within very long volume automation curves.

See: https://support.apple.com/en-us/HT203718

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...