JBberg Posted November 30, 2021 Share Posted November 30, 2021 Hi, What is the best way to do this in Logic? Record to a new track? What about latency? In Harrison Mixbus I usually do an export track in real time, then import and paste it over. No latency that way and pretty fast. I understand some DAWs bounce in real time onto the selected track, which would be ideal. Thanks, Janne Quote Link to comment Share on other sites More sharing options...
triplets Posted November 30, 2021 Share Posted November 30, 2021 You can do a bounce in place either on a track or a region. It has to be in real-time of course because it's external hardware. It also depends how you use the hardware in the routing. Do you use the I/O plugin or mainly sends? Quote Link to comment Share on other sites More sharing options...
JBberg Posted November 30, 2021 Author Share Posted November 30, 2021 I only use I/O to patch in hardware and ping the latency. Do you mean send through an output and record back onto a new track? Quote Link to comment Share on other sites More sharing options...
triplets Posted November 30, 2021 Share Posted November 30, 2021 That's what I do with my external hardware. Quote Link to comment Share on other sites More sharing options...
JBberg Posted November 30, 2021 Author Share Posted November 30, 2021 Ok , thanks. There's no way to set the track input as the output of another in Logic. So I recorded the input of the hardware return. That does not line up so there isn't latency compensation. Do you just drag the regions by eye? Also, there doesn't seem to be a way to export a track in real time either. Bouncing in place in real time would be great. Quote Link to comment Share on other sites More sharing options...
triplets Posted November 30, 2021 Share Posted November 30, 2021 You can bounce in place real time with the I/O plugin. Offline doesn't apply obviously. Did you try it? Quote Link to comment Share on other sites More sharing options...
JBberg Posted November 30, 2021 Author Share Posted November 30, 2021 Within the I/O plugin? No I didn’t notice that. I’ll try to find it. Quote Link to comment Share on other sites More sharing options...
triplets Posted November 30, 2021 Share Posted November 30, 2021 No, it's not within the plugin. Control-Command-B gives you bounce tracks in place. Control-B is region in place. But you knew that already. Quote Link to comment Share on other sites More sharing options...
JBberg Posted November 30, 2021 Author Share Posted November 30, 2021 Sorry, I'm not really getting how I can get Logic to Bounce in place, in real time. Can't find any box to check for that. Only when bouncing the entire project or section down to stereo. Quote Link to comment Share on other sites More sharing options...
triplets Posted December 1, 2021 Share Posted December 1, 2021 Sorry, my bad. Completely forgot BIP doesn't have real time bounce. Recording into another track is your best choice, seems like. Quote Link to comment Share on other sites More sharing options...
JBberg Posted December 1, 2021 Author Share Posted December 1, 2021 Thanks for clearing that up. Am pretty amazed this is how people do it in Logic. Doesn’t seem like the correct way. Bit of a deal breaker for me so the M1 mac has to wait as I would be running primarily Logic on it. Quote Link to comment Share on other sites More sharing options...
fuzzfilth Posted December 1, 2021 Share Posted December 1, 2021 You are right, a realtime mode for BIP is sorely missing. Quote Link to comment Share on other sites More sharing options...
polanoid Posted December 1, 2021 Share Posted December 1, 2021 There's no way to set the track input as the output of another in Logic. That is not quite correct. You can simply use a Bus for this (so, route the output of Track A to e.g. Bus 1 and set the input of Track B to the very same Bus). Quote Link to comment Share on other sites More sharing options...
JBberg Posted December 1, 2021 Author Share Posted December 1, 2021 There's no way to set the track input as the output of another in Logic. That is not quite correct. You can simply use a Bus for this (so, route the output of Track A to e.g. Bus 1 and set the input of Track B to the very same Bus). Thank you!! I just tried this and it seems to work. There is very little if any latency. I wonder if it because Logic compensates for it or because of the low buffer (64)? This way I can duplicate the track with everything, record onto it and just delete or hide the original. Bit of a workaround but at least it's possible. Quote Link to comment Share on other sites More sharing options...
polanoid Posted December 1, 2021 Share Posted December 1, 2021 There is very little if any latency. There is no latency at all. Why should there be? Logic can transport its audio data internally with no latency. Quote Link to comment Share on other sites More sharing options...
JBberg Posted December 1, 2021 Author Share Posted December 1, 2021 Yes of course, I wasn’t thinking. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.