axisrecording Posted September 14, 2005 Share Posted September 14, 2005 tried to post this before, but it didn't show up, forgive me if you've seen this before. happens bout 3 sec after pushing play, no sound, just stops, using a few instruments and an apple loop. It worked fine a couple days ago, not sure what I changed if anything since then. thanks Quote Link to comment Share on other sites More sharing options...
David Nahmani Posted September 14, 2005 Share Posted September 14, 2005 What's your Sample Rate in this session? Audio > Sample Rate Quote Link to comment Share on other sites More sharing options...
triplets Posted September 15, 2005 Share Posted September 15, 2005 Are you using an M-Audio interface? That's a very common message with that hardware. Sometimes the driver goes ballistic or has to be reinstalled if it happens constantly. Make sure you have the latest driver. And if you have to reinstall it, be sure to repair permissions before you do. Quote Link to comment Share on other sites More sharing options...
David Nahmani Posted September 15, 2005 Share Posted September 15, 2005 Are you using an M-Audio interface? That's a very common message with that hardware. 8) I just thought that was a pretty funny comment. Funny because it's true.... same would hold true about pretty much any Digidesign interface. Crappiest drivers on the planet. Quote Link to comment Share on other sites More sharing options...
james oliver Posted September 15, 2005 Share Posted September 15, 2005 Message has been seen on Motu Travler and 828 mk2 and it is when the Driver drops out. "there was a bad batch at motu" James Quote Link to comment Share on other sites More sharing options...
joedeecool Posted September 16, 2005 Share Posted September 16, 2005 Hi axisrecording We have pretty much the same config, exept that I stick to OS10.3.4 (digi recomendation) so I am happy to find someone with a mix hardware. So let's keep in touch... I used to have the same proble with LP 6.4.3. since I switch to LP7.1, I didn't, but I did not work a lot since then. I am now starting a something big for a featured movie in France, opening LP6.4.3 sessions, and I hope I will not have to come here to often... :=) See you. joecool Quote Link to comment Share on other sites More sharing options...
axisrecording Posted September 25, 2005 Author Share Posted September 25, 2005 sorry bout the late reply, it got sent to my bulk folder and I've been working in p-tools since. the sample rate is 44.1 same as digi-driver. thanks for the replys, yes joe, we should stay in touch and I will try switching to 10.3.4 (which I use in P-tools) Quote Link to comment Share on other sites More sharing options...
joedeecool Posted September 26, 2005 Share Posted September 26, 2005 Hi axisrec. About the mac os version with PT mix and logic, I posted on DUC, and I had interesting answers.... Have a look. hope this helps. joecool http://duc.digidesign.com/showflat.php?Cat=&Number=880163&page=0&view=collapsed&sb=5&o=7&fpart=1#880163 Quote Link to comment Share on other sites More sharing options...
axisrecording Posted September 26, 2005 Author Share Posted September 26, 2005 thanks for the link, I too had been running logic in 10.3.9 flawlessly for a long time. this leads me to believe there is another problem. Any other ideas? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.