triplets Posted August 2, 2013 Share Posted August 2, 2013 Since Logic works internally at 32-bit float, does it self-dither on the stereo output to 24-bit fixed? Seems like the obvious answer since we cannot bounce to 32-bit float. At least not yet. And what happens on the I/O plugin? Is there a self-dither to 24-bit fixed also? Quote Link to comment Share on other sites More sharing options...
shivermetimbers Posted August 2, 2013 Share Posted August 2, 2013 Since Logic works internally at 32-bit float, does it self-dither on the stereo output to 24-bit fixed?Seems like the obvious answer since we cannot bounce to 32-bit float. At least not yet. And what happens on the I/O plugin? Is there a self-dither to 24-bit fixed also? The signal going in is 24 bit. Inside Logic, audio is processed in a 32 bit floating point format although you are still hearing a 24 bit signal out of your interface. The extra 8 bits do not contain audio data so there is no need to dither. Quote Link to comment Share on other sites More sharing options...
triplets Posted August 2, 2013 Author Share Posted August 2, 2013 But the output of Logic goes back to 24-bit fixed, because interfaces work in 24bit. So there has to be a dither somewhere if the word length goes to 32 inside Logic. Quote Link to comment Share on other sites More sharing options...
David Nahmani Posted August 2, 2013 Share Posted August 2, 2013 There doesn't have to be: it could be dithered or it could be truncated. I think it's simply truncated. Typically people dither when converting from 24 bit to 16 bit, and you only want to dither once. Quote Link to comment Share on other sites More sharing options...
triplets Posted August 2, 2013 Author Share Posted August 2, 2013 That would be interesting to know if gets truncated or not. I guess it would matter when iTunes will begin accepting high res masters for audio not only from record companies, but from independents also in their Mastered for iTunes program. Quote Link to comment Share on other sites More sharing options...
beej Posted August 2, 2013 Share Posted August 2, 2013 Well, you certainly can dither on a bounce - that's what the dithering options are for. For straight monitoring, I'm not sure we know for sure. I guess any plugin process that is reducing the word length or doing other processing internally may or may not choose to dither - they are a bit of a black box. I guess most plugins and mixer parameters though are just processing the 32f stream and dumping it back to the host (that's certainly how the plugin architecture works). Where the signal goes from a 32f to a 24-bit stream for the interface, I'm not sure - I suspect it's Logic that does this after the output fader and delivers a 24-bit fixed point stream to the audio interface - or maybe it outputs a 32f signal to Core Audio and it's CA that converts to 24-fixed..? Really don't know... Quote Link to comment Share on other sites More sharing options...
David Nahmani Posted August 2, 2013 Share Posted August 2, 2013 In any case it would make sense to me that Logic simply truncates 32f into 24 bit fixed, and I'm assuming that's what Logic does. And really why does it matter? 24 bits give us 144 dB of dynamic or so, so we're talking about the sound you make when breathing vs the noise of a jet engine at 30m. Quote Link to comment Share on other sites More sharing options...
triplets Posted August 2, 2013 Author Share Posted August 2, 2013 It doesn't matter, of course. But then you have the maniacs that say that they bounce to 32-bit float because it sounds better, and how come Logic doesn't have that and blah blah blah. Quote Link to comment Share on other sites More sharing options...
David Nahmani Posted August 2, 2013 Share Posted August 2, 2013 Ah the maniacs... invite them for a smoke break outside the studio. Start a discussion comparing the harmonic distortion of the Studer A800 vs the Otari MTR100 and how you find the wow and flutter to be smoother on the Otari vs the Studer. Nearly immediately excuse yourself, pretending an urging natural need for the bathroom, but instead go back to work in the studio using whatever digital equipment they have, while letting them talk amongst themselves outside. Anyway one thing is sure: when bouncing from 32f to 24 bit fixed with dither set to "none", Logic is not dithering, it's truncating. Quote Link to comment Share on other sites More sharing options...
shivermetimbers Posted August 2, 2013 Share Posted August 2, 2013 It doesn't matter, of course. But then you have the maniacs that say that they bounce to 32-bit float because it sounds better, and how come Logic doesn't have that and blah blah blah. Next time, ask them to let you hear how great it sounds on their 32 bit floating point audio interface. Quote Link to comment Share on other sites More sharing options...
triplets Posted August 3, 2013 Author Share Posted August 3, 2013 Yeah, good point shiver! Quote Link to comment Share on other sites More sharing options...
Holger Lagerfeldt Posted January 16, 2016 Share Posted January 16, 2016 I did some new tests with LPX and my conclusion is that LPX does not apply any automatic dither (such as TPDF) when quantizing from 32 bit float. I generated a very low level test signal and compared the 32 bit floating point live stream in LPX to a bounced 24 bit truncated version of the same signal using AU NetSend from LPX to Audiofile Spectre. I also compared the spectral analysis in Izotope RX Advanced of dithered and non-dithered bounces, which shows no sign of automatic or hidden dither being applied to 24 bit bounces in LPX. All I see is truncation in both 24 bit and 16 bit bounces when no dither is applied. We earlier concluded that Logic (originally back in version 8, I think) was applying auto dither. This was based on tests that showed an unexpected (but small) increase in peak level and spectral analysis that showed information which ought to have been truncated. However, I now believe that we drew a hasty conclusion. The weird level change was real, but it was likely some kind of low order bit error in Logic Pro. I believe we saw the same behavior in Pro Tools at the time. Quote Link to comment Share on other sites More sharing options...
triplets Posted January 17, 2016 Author Share Posted January 17, 2016 Great stuff, Lagerfeldt! Quote Link to comment Share on other sites More sharing options...
stormy Posted January 28, 2017 Share Posted January 28, 2017 Allow me to bump this thread for maybe more recent info. Dither has been popping up in some well known gear forums, and Motown legend Bob Olhsson is an ardent defender of dithering to 24 bits. Is there a way to measure if the latest version of Logic applies dither to the I/O plugin and the main Output (monitoring path)? At these two points, 64-bit float (10.3!) is being either truncated or dithered to 24-bit fixed. Quote Link to comment Share on other sites More sharing options...
steveLpx1 Posted January 28, 2017 Share Posted January 28, 2017 ...mmmmm...I have been following a number of these threads on the question/issue of dithering, and it is lost on me why, when this sort of question/issue comes up for logic, it is not possible to simply ask "The Great Sphinx of CookedApple" for clarification.../s~ Quote Link to comment Share on other sites More sharing options...
zplane Posted January 29, 2017 Share Posted January 29, 2017 There is a bitscope plugin you can insert to see what bit depth is being utilized in real-time, called bitter, free download from, http://www.stillwellaudio.com/plugins/bitter/ if you start out with a 24bit audio file, and have no active plugins, then during playback, bitter will show you the bit depth is 24 bits everywhere in the mixer (see attached screenshot, No_active_plugin.png). Or with no plugins active then the mixer signal path should be a straight pass thru where the output = input. But once you activate a plugin in the mixer, then bitter will show you the bit depth after the active plugin has changed - in this case starting from a 24 bit depth - to what looks like 32 bit. This example shows just taking Logic Pro's EQ out of bypass mode - w/o applying any EQ (see attached screenshot Active_plugin.png). You can always make your last plugin one that sets the bit depth to whatever you like, e.g., 16, 24 bit, and also apply some dither there if the plugin supports it. I would hope that if Logic detects that the output is already 24 or 16 bit fixed, then it is not going to subsequently do anything to the audio (like apply dither again), while playing back/monitoring in real-time. I sometimes thought real-time playback of audio in Logic did not sound the same as the results from offline bounce. I was correct, but not for the reasons I expected. After capturing the audio output from real-time playback, and comparing it with the audio files created by the bounce, I found glitches in the audio recorded from real-time playback aligned with wherever there was a high density of automation events in the mix. The glitches/garbage was at a low level, but measurable. I filed it as a bug, and I believe Apple notified me it had been fixed. Quote Link to comment Share on other sites More sharing options...
stormy Posted January 29, 2017 Share Posted January 29, 2017 Thanks @zplane! So the only way to measure if Logic dithers or truncates the outputs (and I/O plugin) would be to somehow send audio to another host that has the bitscope plugin on it. AFAIK Logic could even be outputting 32-bit float and letting the interface deal with it right? I know that my RME interface explicitly states that it truncates to 24-bit. We're still in the dark about this. For me it comes down to a coin toss between the lesser evil: possible truncation distortion or definite dither noise. Both inaudible to me, by the way! Quote Link to comment Share on other sites More sharing options...
stormy Posted August 30, 2017 Share Posted August 30, 2017 I've done some further testing with the Bitter bitscope plugin, placing it in menuBUS (and also repeated the test using Loopback+Hosting AU). Logic outputs 32-bit audio and lets the interface deal with it. This seems to me the "correct" way to behave, instead of truncating or dithering the audio. Quote Link to comment Share on other sites More sharing options...
Ashermusic Posted August 31, 2017 Share Posted August 31, 2017 Ah the maniacs... invite them for a smoke break outside the studio. Start a discussion comparing the harmonic distortion of the Studer A800 vs the Otari MTR100 and how you find the wow and flutter to be smoother on the Otari vs the Studer. Nearly immediately excuse yourself, pretending an urging natural need for the bathroom, but instead go back to work in the studio using whatever digital equipment they have, while letting them talk amongst themselves outside. This may be the best post I have read on any forum in the last 5 years Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.