Studio ML Posted February 16, 2018 Share Posted February 16, 2018 If your write automation in Touch mode with a Presonus Faderport in Logic, you should note that Logic release the automation after 2 seconds if the fader is not moving even if you keep the finger on the fader. The problem is because the faderport send the wrong midi message to Logic to tell that you have pressed the fader. The current message is a Poly aftertouch of value 1: A0 7F 01 But it should be a Poly aftertouch of value 127: A0 7F 7F The way I have found to fix it is to use the application MidiPipe: https://midipipe.fr.softonic.com/mac You have to setup Midi Pipe this way: 1- Midi In: Select Faderport 2- Applescript Trigger: - Deselect "Pass through" - Copy this script: on runme(message) if (item 1 of message = 160) and (item 2 of message = 127) and (item 3 of message > 0) then set item 3 of message to 127 end if return message end runme 3- Midi Out: Select MidiPipe Output 1 Then you have to change the "Input Port" of the "FaderPort" of the "Control Surface Setup" of Logic: - Select MidiPipe Output 1 Make sure that the MidiPipe is running with this setting when running Logic. That's it! Quote Link to comment Share on other sites More sharing options...
gfawcett Posted April 11, 2018 Share Posted April 11, 2018 Totally works. Thank you so much. I've also sent your post to PreSonus. Hopefully they will patch this with a future update. -Geoff Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.