Ploki Posted December 17, 2017 Share Posted December 17, 2017 So, all faders act like "trim" (instead of having to open automation) That way your automation is retained, but you can still mix with faders as you would. Quote Link to comment Share on other sites More sharing options...
Ploki Posted December 20, 2017 Author Share Posted December 20, 2017 i made an illustration this way when balancing, you could just pull the fader down "whereever" it is atm and it would pull down the whole track. now you have to open automation mode, go into arange, and resize so trim actually displays. Quote Link to comment Share on other sites More sharing options...
stardustmedia Posted January 24, 2018 Share Posted January 24, 2018 I'd love to see something like this. At the moment I have inserted Gain in all channels, bypassed by default. When I start automating the volume, I activate it and set the value equal to the fader value, and then set the fader to 0. Though I'd prefer to have a knob for this. Let's say a little one before the pan knob, or just above the fader. PS: Actually, there should be 2 trim pots. One at the top as well, as a input trim. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.