ValliSoftware Posted January 8, 2021 Share Posted January 8, 2021 Arturia MiniLab Black pad sends the following settings as follows: Pad 1 = Note C1, Midi Ch 10 Incrementing by 1 note for each pad up to Pad 8 For Pad 9 - 16 The pads send a CC message, not a Note Message Pad 9 = CC Midi Ch 1, CC Number 22, CC value 127 When the pad is released, the following is sent. Pad 9 = CC Midi Ch 1, CC Number 22, CC value 0 So a value of 127 means, being pressed and a value of 0 means a pad is released. This is the default setting for the Arturia MiniLab Black. If you've changed from these default settings, this script will not work until you either modifiy the script to your MiniLab changes or restore the default settings to the MiniLab. Quote Link to comment Share on other sites More sharing options...
ValliSoftware Posted January 8, 2021 Author Share Posted January 8, 2021 Another example using a Native Instrument Guitar. Quote Link to comment Share on other sites More sharing options...
ValliSoftware Posted January 8, 2021 Author Share Posted January 8, 2021 Notice that Evolution starts it's key switch at F2, so I adjust the script for that. Now I can switch to the different drum loops from F2-E3 using the pads on my MiniLab Quote Link to comment Share on other sites More sharing options...
ValliSoftware Posted January 8, 2021 Author Share Posted January 8, 2021 Event using PLAY to key switch as well. Quote Link to comment Share on other sites More sharing options...
ValliSoftware Posted January 8, 2021 Author Share Posted January 8, 2021 Another example Quote Link to comment Share on other sites More sharing options...
ValliSoftware Posted January 8, 2021 Author Share Posted January 8, 2021 Again, key switching with the pads on my MiniLab Quote Link to comment Share on other sites More sharing options...
ValliSoftware Posted January 9, 2021 Author Share Posted January 9, 2021 So I decided after reading another post here, to allow each pad to be customize to a MIDI key. This one is pretty cool. Quote Link to comment Share on other sites More sharing options...
ValliSoftware Posted January 9, 2021 Author Share Posted January 9, 2021 Yeah, this is way better. Quote Link to comment Share on other sites More sharing options...
ValliSoftware Posted January 9, 2021 Author Share Posted January 9, 2021 This mapping is way better. Quote Link to comment Share on other sites More sharing options...
ValliSoftware Posted January 9, 2021 Author Share Posted January 9, 2021 (edited) Okay, looks pretty good so far. So here's the script. Remember, this is for the Arturia MiniLab Black controller and system defaults. If you created and are using custom settings, you either have to modify this script or just select system defaults. Edited January 18, 2022 by ValliSoftware Quote Link to comment Share on other sites More sharing options...
ValliSoftware Posted January 17, 2021 Author Share Posted January 17, 2021 Okay, looks pretty good so far.So here's the script. Remember, this is for the Arturia MiniLab Black controller and system defaults. If you created and are using custom settings, you either have to modify this script or just select system defaults. Just in case of updates, I think I did make further updates from this script and included in the knobs scripts so I'll post the latest here as well. Quote Link to comment Share on other sites More sharing options...
MasonHamlinCC2 Posted January 29, 2022 Share Posted January 29, 2022 Hey VS. I am trying to do something similar with an Akai LPD8. All of your videos are showing up as 'Private'. Is it still possible to access these videos to see what your were doing? Thanks. Dave... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.