Jump to content

Keyswitch scripter for Arturia MiniLab Black


Recommended Posts

Arturia MiniLab Black pad sends the following settings as follows:

 

Pad 1 = Note C1, Midi Ch 10

Incrementing by 1 note for each pad up to Pad 8

 

For Pad 9 - 16

The pads send a CC message, not a Note Message

Pad 9 = CC Midi Ch 1, CC Number 22, CC value 127

When the pad is released, the following is sent.

Pad 9 = CC Midi Ch 1, CC Number 22, CC value 0

 

So a value of 127 means, being pressed and a value of 0 means a pad is released.

 

This is the default setting for the Arturia MiniLab Black.

If you've changed from these default settings, this script will not work until you either modifiy the script to your MiniLab changes or restore the default settings to the MiniLab.

 

Link to comment
Share on other sites

Okay, looks pretty good so far.

So here's the script.

 

Remember, this is for the Arturia MiniLab Black controller and system defaults.

If you created and are using custom settings, you either have to modify this script or just select system defaults.

 

Just in case of updates, I think I did make further updates from this script and included in the knobs scripts so I'll post the latest here as well.

Link to comment
Share on other sites

  • 1 year later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...