Jump to content

Audio volume issue guitar


mikeken

Recommended Posts

Hi

 

When I record my guitar on my interface the audio line is just flat with no normal wave lines I use the logic amp simulator and find that all my tracks are just one straight line how do I boost those lines to go up and down? Do I have to record a dry signal first then add the amp simulator effect after

Thanks

Link to comment
Share on other sites

No, you don't have to.

Try this: Record arm the track and mute it. Play the guitar and watch the meter on the guitar channel strip. Adjust the strength of the signal with the gain knob on your interface, you should have it as high as possible without ever hitting red, with a little margin. Now unmute the track and lower the fader on the channel strip to get your monitoring volume right. Then record, do you still have the same problem ?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...