RainoArthur Posted March 25, 2009 Share Posted March 25, 2009 How do you set the sounds to trigger all the way to the end without holding the key using this setup(The SamplePlayer)? Thanks Hi David, I also want to thank you for sharing this, I downloaded the file, I can load samples but the sample doesnot play from the begining to the end, the sample just play as long as I push the button or a key on my computer keyboard. The strange thing is: it worked the first time I tried it. The sample played and I was happy and I asked myself how I could stop it from playing... Then I tried it again, but as I said before, playing only during pushing... Any ideas? Thanx! Raino Quote Link to comment Share on other sites More sharing options...
David Nahmani Posted March 25, 2009 Author Share Posted March 25, 2009 Raino, when you release the key, the volume of the sound is modulated by the release part of Envelope 4, so simply lengthen Envelope 4 to the length of the sample, and the whole sample will play even if you give one short press on that note on your MIDI controller. Quote Link to comment Share on other sites More sharing options...
RainoArthur Posted March 25, 2009 Share Posted March 25, 2009 Raino, when you release the key, the volume of the sound is modulated by the release part of Envelope 4, so simply lengthen Envelope 4 to the length of the sample, and the whole sample will play even if you give one short press on that note on your MIDI controller. Dave, thanx for answering, it's working now but I do not find a way too choose more then 10 seconds for envelope 4. I would need more- 1 minute, 2 minutes, but where can I "tell" that to happen? Thanx for your time and help :-)Raino Quote Link to comment Share on other sites More sharing options...
Presence Posted July 10, 2010 Share Posted July 10, 2010 Thanks David 8) Quote Link to comment Share on other sites More sharing options...
venusian Posted October 23, 2010 Share Posted October 23, 2010 None of the pst presets on the 1st page do reset job, useless. I compare wav track and the same sample in ultrabeet and they are quite different, that means UB CHANGES SOUND. This is crap. Quote Link to comment Share on other sites More sharing options...
fader8 Posted October 23, 2010 Share Posted October 23, 2010 None of the pst presets on the 1st page do reset job, useless. 1st page of what? UB is a drum synth, so of course it changes the sound. Unless you check the signal flow to be sure nothing is effecting the sample. Quote Link to comment Share on other sites More sharing options...
Robbie Sullivan Posted March 17, 2011 Share Posted March 17, 2011 I'm adding my own sampler preset. Has f#1 + a#1 grouped (so in GM world a CL hat shuts off an OP hat). I can't remember how I set the envelopes, but I've found it a very natural-feeling preset to play. Volume is also set to a reasonable level if you're using normalized samples Samples_LPH_GM.pst Ultrabeat preset for intuitive, GM drum mapping w/ normalized samples Quote Link to comment Share on other sites More sharing options...
mrduder Posted November 29, 2011 Share Posted November 29, 2011 so i load my sample in these presets and it sounds like crap..... It sounds nothing like the actual sample. nothing is loaded on my channel strip either. just ultrabeat. and it sounds nothing like the actual sample should sound.... any ideas??? Quote Link to comment Share on other sites More sharing options...
mrduder Posted November 30, 2011 Share Posted November 30, 2011 Raino, when you release the key, the volume of the sound is modulated by the release part of Envelope 4, so simply lengthen Envelope 4 to the length of the sample, and the whole sample will play even if you give one short press on that note on your MIDI controller. ok so i did this but the volume is still not loud enough. i have all volumes in ultrabeat set to 0db and it's still not playing the sample at the correct level...... Quote Link to comment Share on other sites More sharing options...
fader8 Posted November 30, 2011 Share Posted November 30, 2011 Raino, when you release the key, the volume of the sound is modulated by the release part of Envelope 4, so simply lengthen Envelope 4 to the length of the sample, and the whole sample will play even if you give one short press on that note on your MIDI controller. ok so i did this but the volume is still not loud enough. i have all volumes in ultrabeat set to 0db and it's still not playing the sample at the correct level...... Start with the factory Drag & Drop Samples preset. Does it still play quieter when you audition it using UB's keyboard? Quote Link to comment Share on other sites More sharing options...
greensquare799 Posted December 4, 2020 Share Posted December 4, 2020 Hi David, Considering how your OG post was created 15 years prior, I'm not sure how active you are, but I thought I'd ask anyways. My original reason for downloading the SamplePlayerVelocity.pst file was bc my Logic (10.0.2) doesn't have the "Drag & Drop Samples" dropdown menu option in Ultrabeat. Unfortunately, after downloading the file > moving it to my Plug-In Setting/Ultrabeat Folder, my Logic app totally crashed and wouldn't reopen. I've tried: - restarting my computer a few times - trashing the .pst file - didn't find any .logic preferences in my Preferences folder Not sure if you're still active as an admin, but if you have any insight, I'd appreciate it. Thanks! Quote Link to comment Share on other sites More sharing options...
David Nahmani Posted December 4, 2020 Author Share Posted December 4, 2020 Considering how your OG post was created 15 years prior, I'm not sure how active you are, but I thought I'd ask anyways. I'm here every day! My original reason for downloading the SamplePlayerVelocity.pst file was bc my Logic (10.0.2) doesn't have the "Drag & Drop Samples" dropdown menu option in Ultrabeat. Unfortunately, after downloading the file > moving it to my Plug-In Setting/Ultrabeat Folder, my Logic app totally crashed and wouldn't reopen. I've tried: - restarting my computer a few times - trashing the .pst file - didn't find any .logic preferences in my Preferences folder Not sure if you're still active as an admin, but if you have any insight, I'd appreciate it. Thanks! Wow I'm certainly sorry to hear! Let's try to figure out why this is happening to you. When you try to open Logic now, do you get an alert? What happens exactly? If you click Logic in your dock to start opening it then immediately hold down Control and continue holding it, after a while you should get an alert allowing you to open Logic without launching the Core Audio engine, Can you do this? Quote Link to comment Share on other sites More sharing options...
greensquare799 Posted December 4, 2020 Share Posted December 4, 2020 I just looked around (I'm new to the site), and realized you're THE (?) Site Admin? Lol What happened was, I'd keep getting a Crash Report when trying to open the last project that I had opened after installing the .pst. The crash seemed to be identified in Thread 12 - I had no clue about all the coding jargon. I did end up importing media from that 1 Project that crashed, to a fresh new project. That helped me redo some work. I'm able to launch without Core Audio - can this help with debugging or removing the source of the Project crash? Quote Link to comment Share on other sites More sharing options...
David Nahmani Posted December 4, 2020 Author Share Posted December 4, 2020 I'm able to launch without Core Audio - can this help with debugging or removing the source of the Project crash? It may help figure out where the issue is and in some cases fix the issue... if you want to help fix this project file, can you post a new topic explaining this issue on the Logic Pro forum? viewforum.php?f=1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.