reflectingme Posted January 24, 2016 Share Posted January 24, 2016 Hi All Now. This is weird. I am 99% sure it's not user error but I may be wrong. Here goes. it seems whatever instrument I select in Logic, be that a pad or piano etc, it doesn't play the single note I select, but rather it plays a chord!!! it plays the note, a 5th and an octave!! So, if I play C2, the sound is C2, G2, C3 !!! how weird is this. When I record anything, those notes get recorded on the staff despite my only pressing a single note on the keyboard! Now, have I inadvertently selected a note/chord trigger or something here? because this is seriously freaking me out!! Any help appreciated! Many thanks. John Link to comment Share on other sites More sharing options...
des99 Posted January 24, 2016 Share Posted January 24, 2016 Create a new bank project. if it still does it, then likely your controller is sending multiple notes - nothing to do with Logic. if it doesn't, then the issue is with that project, so check you haven't got a MIDI processor on, or some environment processing on the MIDI input stream. Link to comment Share on other sites More sharing options...
reflectingme Posted January 24, 2016 Author Share Posted January 24, 2016 Create a new bank project. if it still does it, then likely your controller is sending multiple notes - nothing to do with Logic. if it doesn't, then the issue is with that project, so check you haven't got a MIDI processor on, or some environment processing on the MIDI input stream. Thank you for responding so promptly, Des! So, I changed the MIDI device to an alternate keyboard I have, and yes, you are absolutely correct, this now sends this single note. So, the erroneous controller is an M-Audio Ozonic keyboard. Any ideas how I reset this or stop it sending multi notes? Is it likely knackered, or is it a glitch that I can reset somehow? Many thanks! John Link to comment Share on other sites More sharing options...
des99 Posted January 24, 2016 Share Posted January 24, 2016 I don't know that keyboard, but likely you have multiple zones turned on or some other thing going in - check it's manual to see what it might be turn it off, or reset it to an initialised state... Link to comment Share on other sites More sharing options...
n6smith Posted January 25, 2016 Share Posted January 25, 2016 You can reset the Ozonic back to the factory defaults on power-up by holding down the OCTAVE UP/DOWN buttons. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.