emjayinla Posted March 30, 2016 Share Posted March 30, 2016 Greetings, In an attempt to be all too clever I set up an environment cable switcher in a float window. Here's my layout Physical Input -> Input Notes -> Monitor 1 -> Cable Switcher Cable Switcher: Cable 0 -> Straight through to Monitor 2 Cable 1 -> Transformer set to convert velocities over 35 to random between 28 and 35 (this my work around to trigger a specific range in a sample instrument) Transformer to Monitor 2 then: Monitor 2-> Sequencer input. And it works as expected - except, the cable switcher randomly changes from position 0 to 1 or 2. I don't see anything obvious in the event list. I can't predict when it happens. The one thing I noticed is the environment float window sometimes takes focus when I click anywhere. Any ideas how to troubleshoot this? (Ideally I'd have a number of buttons floating to have different transformers set to different ranges rather than trying to finger my velocities but I don't know how to do that yet) Cheers LPX 10.2.2 Mavericks Mac Mini 16 gb Link to comment Share on other sites More sharing options...
Jordi Torres Posted March 31, 2016 Share Posted March 31, 2016 Hi, Check the Cable Switcher's input definition, which by default is set to CC7. That means that incoming CC7 messages will trigger the switch. Setting the Input parameter to "-------" or to a type of event that won't ever come from outside Logic ("Fader" or "Meta"), should take care of this problem. J. Link to comment Share on other sites More sharing options...
emjayinla Posted March 31, 2016 Author Share Posted March 31, 2016 Thank you Jordi Torres. That did it. Link to comment Share on other sites More sharing options...
Jordi Torres Posted March 31, 2016 Share Posted March 31, 2016 Good, you're welcome J. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.