cocoroman Posted May 15, 2017 Share Posted May 15, 2017 Hi to every one, it is really weird that, I cant control the Volume of Midi track in Combi Mode on Logic Pro 10.3.1. Either with in it's own Mixer or with MCU Pro. And These happens all all Korg Synths like: Trinity and M3 etc. Did somebody had same problem and the solution. I have tried whole possible tricks, but no go. When use a Combi, and when I bring the Volume down, it will cut all the others except 1 (Gch) Midi channel.. Thanks for the help. Cheers, Link to comment Share on other sites More sharing options...
David Nahmani Posted May 15, 2017 Share Posted May 15, 2017 If the same track in Logic works at affecting your Korg's volume in modes other than Combi, then the issue is with the Korg, not with Logic, and I would look at the Korg's manual to see how Combi mode works in regards to patch volume. Link to comment Share on other sites More sharing options...
cocoroman Posted May 16, 2017 Author Share Posted May 16, 2017 Hi David, yes you are right, I have checked the Korg M3 (Expanded), so the problem was there, which means; on the Combi setup, there are lot's of Midi filters, so was the 4.th one. But I have founded, thanks.. It may help to some others too.. Link to comment Share on other sites More sharing options...
David Nahmani Posted May 16, 2017 Share Posted May 16, 2017 Yes! Good to hear, and thanks for sharing, it may help others, for sure. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.