Keep instrument track Record-enabled while choosing patches for an Aux channel strip? [SOLVED]

[Raoulsplace]

I created lots of channel strip presets on Aux tracks so I can easily switch between the presets in the library browser when the Aux is selected. 
My goal is to keep the R enabled on the software instrument while I scroll through my saved Aux channel strip presets.

The only way to see my saved Aux channel strip presets in the library browser is to have the Aux track selected in Main window.
The problem is, as soon as I select the Aux track the R gets disabled on the software instrument and I cannot play the software instrument while scrolling through the Aux channel strip presets.

Is there a way to force keep the R enabled on the software instrument track?

[triplets]

No, a software instrument track needs to be selected to be in live mode, ready for play.

[JakobP]

56 minutes ago, Raoulsplace said:

...The only way to see my saved Aux channel strip presets in the library browser is to have the Aux track selected in Main window...

You can shift the Library focus by moving it's little blue "pointer" in the inspector. Click your send to see the receiving aux in the right channel strip. To move the "pointer", click left of the "setting" button as shown on screenshot. Hth...

[Atlas007]

57 minutes ago, triplets said:

No, a software instrument track needs to be selected to be in live mode, ready for play.

I was in the impression that one could simply press the R button to enable it for live play mode. So that permits to play many instruments at once… Some kind of ad hoc play mode selection

Edited May 2, 2022 by Atlas007

[polanoid]

13 hours ago, Atlas007 said:

I was in the impression that one could simply press the R button to enable it for live play mode. So that permits to play many instruments at once… Some kind of ad hoc play mode selection

You are right, Atlas. There is a bug, however, that destroys this live mode setting as soon as you select a different track. To me it seems quite random which tracks stay in live mode and which ones leave live mode when I select a different track. Have a look at attached GIF, I can't seem to see a pattern here.

[David Nahmani]

On 5/2/2022 at 9:15 PM, Raoulsplace said:

The only way to see my saved Aux channel strip presets in the library browser is to have the Aux track selected in Main window.

@Raoulsplace I just wanted to check in with you and make sure you saw JakobP's answer, which gives you a solution for your problem?

[Raoulsplace]

On 5/6/2022 at 2:33 PM, David Nahmani said:

@Raoulsplace I just wanted to check in with you and make sure you saw JakobP's answer, which gives you a solution for your problem?

Hi David, I did see the post and JacobP's answer was the solution!

[David Nahmani]

1 minute ago, Raoulsplace said:

Hi David, I did see the post and JacobP's answer was the solution!

Great. Good to hear, and I can now mark the thread as solved. Thank you! 😁