Presonus Inspire 1394

[bernarada]

Hi all

 

Pretty new at all this, I'm using the Inspire 1394 with Logic. I have an acoustic guitar with an inbuilt piezo pick-up and I'd like to simultaneously record two tracks using the pick-up on one track and a microphone on the other to blend the two.

 

So I've hooked the mic on channel one and the guitar on channel two on the Inspire and going to Logic, I can't find how to record both. Logic Help tells me that I cannot arm two tracks using the same input. I understand that, but in the channel strip, the only choice it gives me is "input 1-2" and "input 3-4".

 

How to separate input one and two ? There must be a way. . .

 

Any help would be greatly appreciated.

[DaniGordon]

Hi all

 

Pretty new at all this, I'm using the Inspire 1394 with Logic. I have an acoustic guitar with an inbuilt piezo pick-up and I'd like to simultaneously record two tracks using the pick-up on one track and a microphone on the other to blend the two.

 

So I've hooked the mic on channel one and the guitar on channel two on the Inspire and going to Logic, I can't find how to record both. Logic Help tells me that I cannot arm two tracks using the same input. I understand that, but in the channel strip, the only choice it gives me is "input 1-2" and "input 3-4".

 

How to separate input one and two ? There must be a way. . .

 

Any help would be greatly appreciated.

 

You tracks are probably in stereo.

Find the mono/stereo button on the bottom of the channel strip and put the track in stereo.

[bernarada]

Right. That was it.

 

Thanks Dani