Jump to content

Logic running Pro Tools....


Ruzzo

Recommended Posts

My setup: single Quad Core 2.8GHz 8GB of RAM, running Logic Studio 8.0.2 (projectmix)

Single 1.8 GHz G5 running Pro Tools LE 7.4 (digi 002 rack)

 

Logic (master) is my main sequencer, Pro Tools (slave) will be for audio.

 

What's the best setup?

 

1. Midi the two interfaces together, sync by MTC, or Midi Clock….if so, what are the settings, as I had an unsuccesful run at it.

or

2. Run both programs on my Quad Core - is there a way to have Logic run Pro Tools on the same machine - with two different interfaces on separate firewire ports?

 

Any info would be appreciative.

 

Thanks

Ruzzo

Link to comment
Share on other sites

i wouldn't run them both on the same machine, no, pro tools is far too unsta ble for that

 

the 002 doesn't have wordclock does it? but both your interfaces have ADAT correct? try using the ADAT connection, with the 002 set to sync from the Project Mix, and use a form of midi/midi over lan synchronisation - making sure BOTH sequencers are set to the same format, and that pro tools is set to slave from that signal

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...