halfguard Posted June 25, 2008 Share Posted June 25, 2008 im getting a feedback loop when i use my mpc with logic. it plays fine, but when i hit the pad it sounds twice. i know i dont have something checked right. any help??? Link to comment Share on other sites More sharing options...
halfguard Posted August 4, 2008 Author Share Posted August 4, 2008 one more time...... Link to comment Share on other sites More sharing options...
daverogers Posted August 4, 2008 Share Posted August 4, 2008 sounds like you are sending the midi data from the mpc to logic and its sending it strait back. Link to comment Share on other sites More sharing options...
halfguard Posted August 4, 2008 Author Share Posted August 4, 2008 i know, im trying to figure out how this is happening. Link to comment Share on other sites More sharing options...
LWD Posted August 4, 2008 Share Posted August 4, 2008 What kind of MPC do you own? Try turning off it's Pad to internal sound. This turns off the MPC's sample engine. When midi is playing back make sure input monitoring, software monitoring is off. It's something simple. Link to comment Share on other sites More sharing options...
halfguard Posted August 5, 2008 Author Share Posted August 5, 2008 im using a 1000. midi playback is fine. its when im actually hitting the pads that i hear the feedback loop. Link to comment Share on other sites More sharing options...
silentH Posted August 5, 2008 Share Posted August 5, 2008 im not 100% percent sure this is the problem you're describing, but i was having a similar issue. what i did was turn off soft thru on the mpc, under mode>midi. hope that helps. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.