Rundfunk Posted September 9, 2009 Share Posted September 9, 2009 Hello again! I've plugged my MIni-KP into my interface in channels one and two and am trying to use the unit as a plug in using the I/O. When I Open up the I/O window and select the correct inputs and outputs, i still get nothing... Just to clarify, the line out from the MiniKP is going to channels 1 -2 whilst the line in's are plugged into outputs 3 -4 (although this shouldnt make a difference if im trying to use the unit as a plug in right?) can someone please explain to me how to insert the MiniKP as a plug in on a channel strip. thankyou Link to comment Share on other sites More sharing options...
David Nahmani Posted September 9, 2009 Share Posted September 9, 2009 the line outs are plugged into outputs 3 -4 You're plugging outputs into... outputs? Proper audio routing is: audio interface outputs into unit's inputs, unit's outputs into audio interface inputs. Link to comment Share on other sites More sharing options...
Rundfunk Posted September 9, 2009 Author Share Posted September 9, 2009 yo david, i adited my origional post about 20 seconds after writting it before you commented, but for some reason, you still read it as the original. either way, i just cant get it to work at all. Im doing everything right, but to no avail Link to comment Share on other sites More sharing options...
David Nahmani Posted September 9, 2009 Share Posted September 9, 2009 OK describe the exact routings? Which audio interface? Link to comment Share on other sites More sharing options...
Rundfunk Posted September 9, 2009 Author Share Posted September 9, 2009 The interface is an M-Audio Fast track Ultra 8 x 8, Ive got the line out of the Mini KP going into channels 1 - 2 of my interface, and the Line in's from the Mini KP going to outputs 3 - 4 on my interface. Ive initiated an I/O plug-in on the CS i want to use the MiniKP on, but when I select the inputs and output options within the plug-in nothing is happening. Link to comment Share on other sites More sharing options...
David Nahmani Posted September 9, 2009 Share Posted September 9, 2009 The interface is an M-Audio Fast track Ultra 8 x 8, Ive got the line out of the Mini KP going into channels 1 - 2 of my interface Into INPUTS 1-2? Are those inputs line level? Are you sure in the M-Audio software you're not setup to use Mic preamps for those inputs? Or instrument preamps? Line in's from the Mini KP going to outputs 3 - 4 on my interface. And I assume you've set a stereo I/O plug-in to inputs 1-2 and outputs 3-4? When you press play, do you see some level on the KP? Link to comment Share on other sites More sharing options...
Rundfunk Posted September 9, 2009 Author Share Posted September 9, 2009 Into INPUTS 1-2? Are those inputs line level? Are you sure in the M-Audio software you're not setup to use Mic preamps for those inputs? The interface has pre-amps for channels 1 -2. yeah ive set it up as you've said, but still im not getting any level on Logic at all... hmm strange Link to comment Share on other sites More sharing options...
David Nahmani Posted September 9, 2009 Share Posted September 9, 2009 The interface has pre-amps for channels 1 -2. You need to bypass those preamps. Surely there's a way to set those inputs to line inputs? Otherwise... try input 3-4? Check levels meters at various points in the chain to check for proper signal routing: KP input? KP output? M-audio input? M-audio software? Etc... Link to comment Share on other sites More sharing options...
Rundfunk Posted September 10, 2009 Author Share Posted September 10, 2009 okay david thanks alot Will give that a go! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.