Chris W Posted June 12, 2011 Share Posted June 12, 2011 I have old material that was transferred from tape that I'm going to remix, just from Logic to my monitors connected to my iMac. No other hardware is in between. My question revolves around the channel strip sends to headphones to stereo out. I used the 24-track project template which has each strip w/ a send to an aux headphone. I don't need this send considering my hardware setup, correct? I'm also curious why the headphone aux is routed to stereo out. If I had other hardware would this normally be routed elsewhere but it just does it this way as a default? I know this is basic stuff but I'm just starting out. Link to comment Share on other sites More sharing options...
David Nahmani Posted June 12, 2011 Share Posted June 12, 2011 I used the 24-track project template which has each strip w/ a send to an aux headphone. I don't need this send considering my hardware setup, correct? Correct. I'm also curious why the headphone aux is routed to stereo out. If I had other hardware would this normally be routed elsewhere but it just does it this way as a default? It would normally be routed to whatever outputs you have connected to your headphones or headphones amp. Whoever made the template doesn't know which output number that is so it's up to you to set it up. Link to comment Share on other sites More sharing options...
Chris W Posted June 14, 2011 Author Share Posted June 14, 2011 Thanks, David! That's exactly what I needed. I'll be sure to post a mix when I'm at that point. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.