stonzthro Posted February 27, 2015 Share Posted February 27, 2015 All of my notes in the notes tab are back to being white only - Logic won't allow me to change the colors any more! I put all sorts of template into in there so this is a big bummer! Quote Link to comment Share on other sites More sharing options...
mmm42 Posted February 27, 2015 Share Posted February 27, 2015 Logic Pro X 10.1.1 update http://support.apple.com/en-us/TS4498 Stability and performance Logic no longer sometimes stops responding when you open it with Euphonix control surfaces installed Resolves an issue that could cause the Download Manager to appear empty Logic no longer sometimes quits unexpectedly when you use Izotope RX4 as external audio editor Main window Disabling Automation view in the Main window no longer causes region-based automation that has been switched off to playback unexpectedly Click-holding a region now immediately brings up the Region Info window It is again possible to split a take region with the Scissors tool Editing automation during playback now works properly in projects that start before 1 1 1 1 Writing automation for send mutes now works as expected The cursor keys on control surfaces no longer sometimes trigger unexpected key commands Region based automation for all Smart Control parameters now displays reliably Logic now displays the tempo correctly when the Display Tempo As preference is set to "Frames Per Click with Decimals," or "Frames Per Click with Eighths," and the frame rate is 50, 59.94, or 60 fps Audio tracks edited with Melodyne in songs that originated in Logic Pro 9 now play back in sync Logic Screensets that include only plug-in windows work as expected again MIDI regions recorded in Cycle mode no longer sometimes have a measure before the start position of the recording when the first note is performed within the Cycle Pre-processing time before the downbeat The "Beats from Region" function works as expected again Logic no longer outputs an audio pop when switching between certain patches Editors Deleting fader events for region based automation in the Event List editor now properly removes the interpolation events between them Clicking the plus button in the Sysex Fader editor again adds events as expected All audio take regions now reliably display in the Track Editor The Brush Tool no longer gets stuck in fixed pitch mode when selected after using the Pencil Tool While using the Brush tool, pressing Shift while pressing the mouse button no longer erases the recently brushed notes There is now an option "Snap MIDI Draw and Automation” in the Piano Roll Snap menu Auto Set Locators no longer improperly follows note selections inside of regions The Toggle Loop trigger setting in Touch Tracks again works as expected The Piano Roll now reliably opens with the visible area showing the notes contained in the selected region Undo now reliably works after moving events in the Piano Roll Looping regions with Show Drum Names enabled in the Piano Roll no longer causes notes to transpose unexpectedly Muted notes in the Piano Roll no longer play when clicked Scale Quantize no longer sometimes moves notes that are already in the selected key Touching the Ruler in the Piano Roll with a rubber band selection no longer causes visible Time Frame handles to move to the wrong position MIDI events clicked in the Piano Roll now output on their set MIDI channel as expected The “Delete and Select Next Event” key command now works properly in the Piano Roll Using the right/left arrow keys now reliably triggers notes in the Piano Roll when a different track is selected in the Main window On/Off buttons in the Environment again operate correctly with a short mouse click Environment cabling is now reliably maintained when importing Environment layers not a project The Note Head menu in the Environment Mapped Instrument editor is no longer empty MIDI Draw automation points now follow the mouse as expected when editing in an independent Piano Roll window Mixer Pre-fader sends are no longer affected by VCA fader changes Replacing Drum Kit Designer with Drum Machine Designer on a Drummer track channel strip no longer converts the track to a Software Instrument track Audio Device controls no longer sometimes display non-functional buttons for the attached audio interface Undoing the deletion of a channel strip in the Mixer no longer leaves the channel strip in a non-functional state Plug-ins Changing the Knee value in the Platinum Compressor no longer causes unexpected changes in sound and metering when switching to the Classic VCA Compressor model Multimeter plug-in instances saved in previous versions of Logic now load with the correct settings Logic Remote and Controls view in Logic Pro no longer show the RMS/Peak controls for the Compressor models that do not support RMS/Peak Songs using Lexicon PCM Native bundle plug-ins no longer exhibit audio artifacts when played back Accessibility VoiceOver can once again access audio channels as well as the track header volume and pan controls Control Surfaces Channel names now update correctly on control surfaces when opening or clos track stacks in Logic Logic Remote again reliably connects to Logic Pro X at launch when you set the Startup Action to “Ask" in Logic Pro EuCon Artist control surfaces can again control a channel’s send level in Logic Quote Link to comment Share on other sites More sharing options...
des99 Posted February 27, 2015 Share Posted February 27, 2015 I *love* that you guys compile and publish these release notes! Thanks! Quote Link to comment Share on other sites More sharing options...
rzzzy1 Posted February 27, 2015 Share Posted February 27, 2015 Preview is working fine here on OS10.9.5 and LPX 10.1.1 Quote Link to comment Share on other sites More sharing options...
des99 Posted February 27, 2015 Share Posted February 27, 2015 Preview is working fine here 0n OS10.9.5 and LPX 10.1.1 Same here, same specs. Quote Link to comment Share on other sites More sharing options...
vondersulzburg Posted February 27, 2015 Share Posted February 27, 2015 Since the update to 10.1.1 my Logic Remote is no longer connecting. But it does as well not connect to GarageBand nor to MainStage. Seems to be something with the IPAD APP Quote Link to comment Share on other sites More sharing options...
musos Posted February 27, 2015 Share Posted February 27, 2015 There's an update to Logic Remote. Mine connects, but displays the tracks/faders incorrectly, for example, the meters light up on an adjacent track. Very goofy.... Quote Link to comment Share on other sites More sharing options...
des99 Posted February 27, 2015 Share Posted February 27, 2015 Did you delete the Logic remote control surface in Logic, restart Logic, and try again? Quote Link to comment Share on other sites More sharing options...
gmarinov Posted February 28, 2015 Share Posted February 28, 2015 thank you so much! Quote Link to comment Share on other sites More sharing options...
LogicIsDoomed Posted February 28, 2015 Share Posted February 28, 2015 After years of many people reporting the SMPTE bug in the event list, it has NOT yet been fixed as of 10.1!!! Has it yet been fixed in 10.1.1 Quote Link to comment Share on other sites More sharing options...
des99 Posted February 28, 2015 Share Posted February 28, 2015 After years of many people reporting the SMPTE bug in the event list, it has NOT yet been fixed as of 10.1!!! Has it yet been fixed in 10.1.1 No. Quote Link to comment Share on other sites More sharing options...
anp27 Posted February 28, 2015 Share Posted February 28, 2015 Hey cool.... been searching for this since yesterday, thanks! Quote Link to comment Share on other sites More sharing options...
Rkmusic Posted February 28, 2015 Share Posted February 28, 2015 Logic x keeps getting better. Quote Link to comment Share on other sites More sharing options...
vondersulzburg Posted February 28, 2015 Share Posted February 28, 2015 @des99 Danke, now after deleting the surface the remote from IPAD is running again. Michael Quote Link to comment Share on other sites More sharing options...
Ploki Posted February 28, 2015 Share Posted February 28, 2015 STILL no preview? This is an OS X issue not a Logic issue. which OS? it works here, lpx 10.1.1, yosemite 10.10.1 Quote Link to comment Share on other sites More sharing options...
denitronik Posted February 28, 2015 Share Posted February 28, 2015 Deleted notes in the piano roll do not dissapear (they don't play but they are still graphically present). I have to force a redraw of the piano roll editor to correct the display. This bug was in Logic 10.0, was not in 10.1 and now back in 10.1.1. Anybody else have this behavior? Quote Link to comment Share on other sites More sharing options...
Tribalman Posted February 28, 2015 Share Posted February 28, 2015 which OS? it works here, lpx 10.1.1, yosemite 10.10.1 As said Eric, bug in 10.10.2 Quote Link to comment Share on other sites More sharing options...
Andreas Lorentsen Posted February 28, 2015 Share Posted February 28, 2015 There´s a bug in the quicklook framework in 10.10.2, to my understanding. I get lots of error messages in the console related to it, and on my Macbook Pro it´s impossible to get any kind of expected previews in Finder since upgrading to 10.10.2. Quote Link to comment Share on other sites More sharing options...
Daggilarr Posted March 2, 2015 Share Posted March 2, 2015 Deleted notes in the piano roll do not dissapear (they don't play but they are still graphically present). I have to force a redraw of the piano roll editor to correct the display. This bug was in Logic 10.0, was not in 10.1 and now back in 10.1.1. Anybody else have this behavior? This is would be a PITA, I am waiting to hear if this is indeed a 10.1.1 bug, but I can find no further mention of this problem anywhere. Anyone tested this? Quote Link to comment Share on other sites More sharing options...
Daggilarr Posted March 2, 2015 Share Posted March 2, 2015 Deleted notes in the piano roll do not dissapear (they don't play but they are still graphically present). I have to force a redraw of the piano roll editor to correct the display. This bug was in Logic 10.0, was not in 10.1 and now back in 10.1.1. Anybody else have this behavior? This is would be a PITA, I am waiting to hear if this is indeed a 10.1.1 bug, but I can find no further mention of this problem anywhere. Anyone tested this? I heard from a reliable source that they could not reproduce this, so I updated and neither can I. Quote Link to comment Share on other sites More sharing options...
fisherking Posted March 2, 2015 Share Posted March 2, 2015 (edited) weird, but, while the preview pane in column view STILL doesn't show anything (other than a generic logic file icon)...quicklook NOW works correctly with LX files (this is with the OS X 10.10.3 beta). so...progress.... Edited March 2, 2015 by fisherking Quote Link to comment Share on other sites More sharing options...
Jangus Posted March 2, 2015 Share Posted March 2, 2015 You’re not alone with this. I get deleted notes staying on the screen, but it’s not persistent as they seem to go away in a couple seconds. It’s a definite graphic glitch. Quote Link to comment Share on other sites More sharing options...
aeonrick Posted March 3, 2015 Share Posted March 3, 2015 Hello everyone. Having same problem since. 10.1... When there is an alias of drummer region triggering Steven Slate Drums, opening old 10.0.7 files, you have to recreate all the alias regions again. No biggie, but.... I have to keep on doing this for every update. And sometimes, drummer patterns are not the same from version to version. Very strange bug I know, but after spending over a thousand hours on projects, this is a PIA. Thoughts? Quote Link to comment Share on other sites More sharing options...
Tribalman Posted March 3, 2015 Share Posted March 3, 2015 Deleted notes in the piano roll do not dissapear (they don't play but they are still graphically present). I have to force a redraw of the piano roll editor to correct the display. This bug was in Logic 10.0, was not in 10.1 and now back in 10.1.1. Anybody else have this behavior? Not appeared here OSX 10.10.1 LPX 10.1.1. Quote Link to comment Share on other sites More sharing options...
Attracks pilot Posted March 3, 2015 Share Posted March 3, 2015 Have the same issue with Mac OS X 10.9.5 and LPX 10.1.1. As a workaround I switch to Score Editor and back to Piano Roll. Quote Link to comment Share on other sites More sharing options...
DaveRobinson Posted March 4, 2015 Share Posted March 4, 2015 Very nice update. The update itself was smooth, pleased we didn't have to wait too long for some fixes. Quote Link to comment Share on other sites More sharing options...
RobbinsEgg Posted March 7, 2015 Share Posted March 7, 2015 After years of many people reporting the SMPTE bug in the event list, it has NOT yet been fixed as of 10.1!!! Has it yet been fixed in 10.1.1 No. Ya, Logic and SMPTE have problems, which sucks because they broke it. it was working, now not. For me it's no longer being able to enter Movie Start times unless you have a movie loaded in the session. Not good for external video sync. Been sending reports, no love yet. Quote Link to comment Share on other sites More sharing options...
LogicIsDoomed Posted March 7, 2015 Share Posted March 7, 2015 Ya, Logic and SMPTE have problems, which sucks because they broke it. it was working, now not. For me it's no longer being able to enter Movie Start times unless you have a movie loaded in the session. Not good for external video sync. Been sending reports, no love yet. i discovered the event list bug problem is NOT only related to typing in smpte locations in the event list. In fact any event that you type into the Event List, Logic DOES NOT accept!!!! Even using the mouse to slide events in the Event List to different positions is VERY inaccurate and extremely different to slide to a specific positions. The slider action with the mouse when moving events in the Event List is very unreliable and yields hit and miss results and is very very tedious to land it on the exact correct spot. To me this is an OUTRAGE that for years people have reported this problem and Apple has ignored this BUG for the last eternity!!! Quote Link to comment Share on other sites More sharing options...
Ashermusic Posted March 7, 2015 Author Share Posted March 7, 2015 I am not seeing that behavior here. I just tried it three times and each time I was able to accurately type in what I desired or drag it to where I desired with the exception of SMTE times. Quote Link to comment Share on other sites More sharing options...
Jangus Posted March 7, 2015 Share Posted March 7, 2015 "OSX 10.10.10" in your Sig. ??? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.