Not getting audio signal on record enabled tracks in Logic from Tascam model 12.

[ennbe]

 

I recently updated all my plugins, OS and firmware for the Tascam Model 12. I have the audio settings enabled correctly, privacy setting for microphone enabled for Logic, and Audio Midi setting set up correctly. When I play an instrument (I've tried synth and bass guitar on multiple inputs) the signal is registered on the model 12, but nothing on Logic. Tracks are record enabled, but completely non responsive to the audio signal. I tested the internal mic with out any issue. Output works fine both at a system level and with Logic. I've done multiple restarts including restarting the NVRAM by holding Option, Command, P, and R at power up. Nothing has worked PLEASE HELP!

MacBook Pro

13-inch, 2017, Two Thunderbolt 3 ports

Processor 2.3 GHz Dual-Core Intel

Core i5

Graphics Intel Iris Plus Graphics

640 1536 MB

Memory 16 GB 2133 MHz

macOS Ventura 13.6.4

Logic 10.8.1

 

[scg]

- Obvious question, but was it working before the updates?

- Have you tried it with any other apps, like GarageBand (same code base as Logic, obviously) or Audacity?

[Atlas007]

Not familiar with the Tascam model 12, but according to your AMS screen captures, its output and input levels are all down to zero…

If applicable, have you prep your Tascam model 12 as explained in the documentation?

https://www.tascam.eu/en/docs/Model12_DAW_Control_RevC.pdf

[rsilverst]

have a look at my post just a few minutes ago - i was having same issue. in Settings > Audio > General there's a checkbox that mentions garageband. for some reason that is now checked by default and it makes you have no input monitoring. if you uncheck that, maybe this will solve your problem? 

[oscwilde]

Menu bar....make sure Standard is selected:

[ennbe]

Update - it was a system setting on the model 12 that I didn’t know about that was set to only work on the first 2 channels. Not even sure why that setting exists, but that was the culprit. Thanks for all the replies